CNC Machinist I-III - (Swing Shift)
Sacramento, California
Employer: Kratos Defense
Industry: Machine Shop
Salary: $45.00 per hour
Job type: Full-Time
GENERAL JOB SUMMARY:
To perform machining tasks as directed by their supervisor utilizing the CNC Vertical Milling Center (main responsibility), Bridgeport Mill, Engine Lathe and CNC Lathe as well as other Machine Shop support equipment (i.e. grinder, belt sander, cold saw, etc.).
ESSENTIAL JOB FUNCTIONS:
The duties and responsibilities listed below apply to all levels of CNC Machinists. Each level of CNC Machinist has additional duties and responsibilities listed.
• Updates set-up and tooling sheets as required, maintaining the VMC logbook for shift turnover, documenting travelers and Discrepant Materials Report (DMR).
• Basic programming ("G" codes).
• Supports and exhibits the focus of zero defects as well as right-the-first-time attitude.
• Inspects work utilizing basic inspection equipment (calipers, micrometers, depth gage, etc).
• Sets up and oversees Machine Operators as required during post machining runs.
• Provides suggestions or advice to maximize the efficiency of Machine Shop.
• Maintains a clean work area and ensures strict adherence to the 5S Standards.
• Accurately adjusts machine settings to complete tasks according to specifications.
• Uses various machine shop support equipment including Saws, Belt Sanders, Grinders, Overhead Cranes and Drill Press.
• Follows FOD (foreign object prevention) practices.
• Complies with established safety directives.
• Complies with established QMS procedures.
CNC Machinist I
1. Works under limited supervision.
2. Specific duties and responsibilities for this level include:
• Math
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
CNC Machinist II
1. Works under minimal supervision.
2. Responsible for training less skilled CNC Machinists.
3. Specific duties and responsibilities for this level include an intermediate level of:
• Math
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
CNC Machinist III
1. Works very independently.
2. Specific duties and responsibilities for this level include an advanced level of:
• Math
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
Non-Essential Job Duties
• Other duties may be assigned
SUPERVISORY RESPONSIBILITY:
None.
Compensation
$25.00 - $45.00 Hourly
KNOWLEDGE, SKILLS & ABILITIES:
Each successive level of CNC Machinist builds on the identified knowledge, skills and abilities listed for the previous level(s) CNC Machinists.
• Ability to maintain sensitive and confidential information as required by government standards
• Ability to interact effectively with peers and supervisors
• Ability to interact appropriately with the public when necessary
• Ability to adhere to workplace rules
CNC Machinist I
• Knowledge of commonly used concepts, practices, and procedures involving CNC machines.
• Knowledge of cutters and effective use of cutters for maximum efficiency.
• Familiarity with lean manufacturing, and continuous improvement techniques beneficial.
• Ability to read and interpret drawings.
• Must be able to demonstrate accurate basic math skills.
• Ability to comprehend geometric dimensioning and tolerancing.
CNC Machinist II
• Must be able to interpret and work from industry specifications.
CNC Machinist III
• Ability to train and mentor level I and II CNC Machinists
EDUCATION AND EXPERIENCE:
Each successive level of CNC Machinist builds on the identified education and experience listed for the previous level(s) CNC Machinists.
CNC Machinist I
Required:
2-3 years of hands on experience in a CNC Machine Shop. Requires high school education or equivalent. Typical qualifications for this level include:
• Math - solid understanding of fractions and decimals.
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship).
Preferred:
CNC Machinist II
Required:
5+ years hands-on experience in a CNC Machine Shop. Must be able to demonstrate accurate intermediate math skills. Typical qualifications for this level include an intermediate level of:
• Math - functional understanding and practical application of trigonometry
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
Preferred:
Experience with aircraft machined parts a definite plus.
CNC Machinist III
Required:
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
Preferred:
Experience with aircraft machined parts a definite plus.
WORK ENVIRONMENT/PHYSICAL REQUIREMENTS:
Ability to stand and sit for long periods of time
Ability to lift up to 50 pounds
Standing, walking, bending, reaching and working from slightly elevated surface.
Use hand tools.
Occasionally lifts and carries heavy objects.
Employee may generate, handle, manage, or work around hazardous materials and hazardous wastes.
TRAVEL REQUIREMENTS:
N/A
To perform machining tasks as directed by their supervisor utilizing the CNC Vertical Milling Center (main responsibility), Bridgeport Mill, Engine Lathe and CNC Lathe as well as other Machine Shop support equipment (i.e. grinder, belt sander, cold saw, etc.).
ESSENTIAL JOB FUNCTIONS:
The duties and responsibilities listed below apply to all levels of CNC Machinists. Each level of CNC Machinist has additional duties and responsibilities listed.
• Updates set-up and tooling sheets as required, maintaining the VMC logbook for shift turnover, documenting travelers and Discrepant Materials Report (DMR).
• Basic programming ("G" codes).
• Supports and exhibits the focus of zero defects as well as right-the-first-time attitude.
• Inspects work utilizing basic inspection equipment (calipers, micrometers, depth gage, etc).
• Sets up and oversees Machine Operators as required during post machining runs.
• Provides suggestions or advice to maximize the efficiency of Machine Shop.
• Maintains a clean work area and ensures strict adherence to the 5S Standards.
• Accurately adjusts machine settings to complete tasks according to specifications.
• Uses various machine shop support equipment including Saws, Belt Sanders, Grinders, Overhead Cranes and Drill Press.
• Follows FOD (foreign object prevention) practices.
• Complies with established safety directives.
• Complies with established QMS procedures.
CNC Machinist I
1. Works under limited supervision.
2. Specific duties and responsibilities for this level include:
• Math
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
CNC Machinist II
1. Works under minimal supervision.
2. Responsible for training less skilled CNC Machinists.
3. Specific duties and responsibilities for this level include an intermediate level of:
• Math
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
CNC Machinist III
1. Works very independently.
2. Specific duties and responsibilities for this level include an advanced level of:
• Math
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
Non-Essential Job Duties
• Other duties may be assigned
SUPERVISORY RESPONSIBILITY:
None.
Compensation
$25.00 - $45.00 Hourly
KNOWLEDGE, SKILLS & ABILITIES:
Each successive level of CNC Machinist builds on the identified knowledge, skills and abilities listed for the previous level(s) CNC Machinists.
• Ability to maintain sensitive and confidential information as required by government standards
• Ability to interact effectively with peers and supervisors
• Ability to interact appropriately with the public when necessary
• Ability to adhere to workplace rules
CNC Machinist I
• Knowledge of commonly used concepts, practices, and procedures involving CNC machines.
• Knowledge of cutters and effective use of cutters for maximum efficiency.
• Familiarity with lean manufacturing, and continuous improvement techniques beneficial.
- Ability to create, edit and save (familiarity with PC a must) various programs on an "as needed" basis.
- Knowledge of the HAAS controllers a plus.
• Ability to read and interpret drawings.
• Must be able to demonstrate accurate basic math skills.
• Ability to comprehend geometric dimensioning and tolerancing.
CNC Machinist II
• Must be able to interpret and work from industry specifications.
CNC Machinist III
• Ability to train and mentor level I and II CNC Machinists
EDUCATION AND EXPERIENCE:
Each successive level of CNC Machinist builds on the identified education and experience listed for the previous level(s) CNC Machinists.
CNC Machinist I
Required:
• Math - solid understanding of fractions and decimals.
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
Preferred:
- Experience with aircraft machined parts a definite plus.
CNC Machinist II
Required:
• Math - functional understanding and practical application of trigonometry
• Documentation
• Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
Preferred:
CNC Machinist III
Required:
- 8+ years hands-on experience in composite manufacturing.
- Proven experience handling and machining various composite materials.
- Proven experience handling and machining various honeycomb metal bond assemblies.
- Typical qualifications for this level include an advanced level of:
- Math - functional to advanced understanding and practical application of trigonometry
- Documentation
- Materials Knowledge
• Tooling/Molds
• Equipment
• Process
• Quality
• Safety
Preferred:
WORK ENVIRONMENT/PHYSICAL REQUIREMENTS:
Ability to stand and sit for long periods of time
Ability to lift up to 50 pounds
Standing, walking, bending, reaching and working from slightly elevated surface.
Use hand tools.
Occasionally lifts and carries heavy objects.
Employee may generate, handle, manage, or work around hazardous materials and hazardous wastes.
TRAVEL REQUIREMENTS:
N/A
Created: 2024-05-01
Reference: 360183
Country: United States
State: California
City: Sacramento
ZIP: 95820
Similar jobs:
-
CNC Machinist
Volt in Mission Viejo, California💸 $50 - $55 per hour -
Machinist
Volt in Santa Maria, California💸 $27 - $35 per hour -
Master Machinist/Programmer
Volt in Del Mar, California💸 $30 per hour -
Manual Machinist
Volt in FRESNO, California💸 $26 per hour -
CNC Machinist
Volt in Santa Barbara, California💸 $25 per hour -
2nd shift ACME Machinist Level 1
Precision Castparts Corp. in North Hollywood, California💸 $20.50 - $29.00 per hour -
Machinist D
L-3 Technologies in Simi Vey, California💸 $74000 - $98000. per year -
Machinist (Weekend Shift)
Precision Castparts Corp. in 1 Valencia, California -
1st Shift Swiss Machinist Level 1
Precision Castparts Corp. in 1 North Hollywood, California -
Grinding Machinist
Volt in North Hollywood, California💸 $19 - $20 per hour -
CNC Machinist (2nd Shift, Lathe) - PB
Precision Castparts Corp. in Gardena, California💸 $23.50 - $29.50 per hour -
CNC Machinist
Volt in Valencia, California💸 $28 per hour -
CNC Machinist (2nd Shift, Lathe Set up/ Operate) - PB
Precision Castparts Corp. in 1 Gardena, California💸 $23.00 - $29.00 per hour -
CNC Machinist- 2nd shift
Volt in GARDENA, California -
Maintenance Machinist
General Dynamics Corporation in San Diego, California -
CNC Machinist Team Lead - LIFE SCIENCES - $28/HR - $35/HR PLUS $1.00 SHIFT DIFF. -2ND SHIFT (MONDAY - FRIDAY 3:00PM - 11:30PM) GARDEN GROVE, CA
Saint Gobain in GARDEN GROVE, California💸 $28 per hour -
Machinist
Timken in Santa Fe Springs, California -
2nd Shift CNC Lathe Machinist Level 3
Precision Castparts Corp. in 1 North Hollywood, California -
Machinist
Precision Castparts Corp. in South Gate, California -
2nd Shift Machinist Aerospace
PARKER HANNIFIN CORP in Camarillo, California💸 $20.10 per hour