CNC Programmer
Jenkintown, Pennsylvania
Employer: Precision Castparts Corp.
Industry: Engineering
Salary: Competitive
Job type: Full-Time
Responsible for designing complex tooling and preparing programs to manufacture work orders for complex aerospace and precision industrial fasteners on CNC equipment. Select suitable designs, tools and materials from a wide variety of combinations to obtain optimum tool life.
Primary Duties & Responsibilities: .
Primary Functional responsibilities include, but are not limited to:
resolved.
consideration to the dimension requirements, material, shrinkage, formability,
machinability, machining rates, etc.
the relationship to other tools and the sequences of operation.
changes to improve tool life and achieve the most economical cycle time.
Review each order for possible cost reductions. Recommend method changes
where CNC methods are more economical.
monthly summary of all cost improvements.
Required Skills:
Required Experience:
Level of Education:
Bachelors degree in Mechanical Engineering or equivalent, preferred
ITAR Requirements:
Our organization has a responsibility to comply with all applicable requirements set forth by International Traffic Arms Regulations ("ITAR", 22 CFR 120-130). As such, this position may have access to ITAR controlled information and must meet eligibility requirements to work in the United States.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other status protected by applicable law.
Working Conditions/Physical Requirements:
N-Never, O-Occasionally ( 80%)
Exposure to Adverse Working Conditions:
• Noise, Noxious Orders, Temperatures
F
• Hazardous Materials
O
Physical Conditions:
• Close Eye Work (computers, typing, reading, writing)
F
• Sedentary (continuous sitting)
O
• Light Work (standing, walking, lifting
C
• Moderate Work (lifting 15-30 pounds, prolonged use of small hand instruments or tools)
F
• Moderately Heavy Work (lifting, moving, loading up to 35 pounds)
O
• Heavy/Hard Work (above average strength & stamina)
O
Travel Requirements:
• None
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
Primary Duties & Responsibilities: .
Primary Functional responsibilities include, but are not limited to:
- Review and analyze method sheets, product drawings, work drawings, and related
resolved.
- Prepare programs for each operation scheduled to run on CNC lathes, milling machines,
- Select and assign drills, reamers, cutters, threading tools, form tools, fixtures, spacers,
- Utilize existing or standard tooling wherever possible. Design complicated tooling or
consideration to the dimension requirements, material, shrinkage, formability,
machinability, machining rates, etc.
- Prepare the necessary drawings for each new tool, assign part numbers and maintain part
- Prepare layout sheets as required, especially for complicated progressions or multiple
the relationship to other tools and the sequences of operation.
- Tool check each order. Estimate the tool life for each work order and list the quantity of
- Review all first piece runs at the machine to assure product conformance and to
changes to improve tool life and achieve the most economical cycle time.
Review each order for possible cost reductions. Recommend method changes
where CNC methods are more economical.
- Attend programming courses and seminars as required to become knowledgeable of
- Resolve difficult and unusual problems, rarely refer problems to supervisor. Advise
monthly summary of all cost improvements.
- Maintain daily contacts with Manufacturing, Production Control, Purchasing and
- Perform other duties as necessary or appropriate to the position.
Required Skills:
- Esprit and SolidWorks Software
- 2D and/or 3D modelling
- Solidworks
- Automation and gantry load systems for high volume components
- Experience machining aerospace grade alloys (especially high nickel content)
- Demonstrated continuous improvement on tooling cost and cut time
- Able to define new machine tool requirements and project manage implementation
- Strong communication skills with vendors and operators
- Green Belt
Required Experience:
- 2-5 years CNC programming
- Tooling selection
- Turning and milling capability (3 axis, 4 axis)
- GD&T knowledge
Level of Education:
Bachelors degree in Mechanical Engineering or equivalent, preferred
ITAR Requirements:
Our organization has a responsibility to comply with all applicable requirements set forth by International Traffic Arms Regulations ("ITAR", 22 CFR 120-130). As such, this position may have access to ITAR controlled information and must meet eligibility requirements to work in the United States.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other status protected by applicable law.
Working Conditions/Physical Requirements:
N-Never, O-Occasionally ( 80%)
Exposure to Adverse Working Conditions:
• Noise, Noxious Orders, Temperatures
F
• Hazardous Materials
O
Physical Conditions:
• Close Eye Work (computers, typing, reading, writing)
F
• Sedentary (continuous sitting)
O
• Light Work (standing, walking, lifting
C
• Moderate Work (lifting 15-30 pounds, prolonged use of small hand instruments or tools)
F
• Moderately Heavy Work (lifting, moving, loading up to 35 pounds)
O
• Heavy/Hard Work (above average strength & stamina)
O
Travel Requirements:
• None
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
Created: 2024-09-15
Reference: SSytNGQL5KmM
Country: United States
State: Pennsylvania
City: Jenkintown
Similar jobs:
-
CNC Programmer
B&G Manufacturing Co. in Hatfield, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer - Tool / Manufacturing Engineer
General Dynamics Corporation in Scranton, Pennsylvania -
CNC Programmer
PARKER HANNIFIN CORP in Irwin, Pennsylvania💸 $60000 per year -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
IMI plc in Irwin, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer - Tool / Manufacturing Engineer
General Dynamics Land Systems in Scranton, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Transfer, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania -
CNC Programmer
Precision Castparts Corp. in Jenkintown, Pennsylvania