Job Summary

Marine Corps Community Services (MCCS)is looking for the best and brightest to join our Team! MCCSis a comprehensive program that supports and enhances the quality of life for Marines, their families, and others in the Marine Corps Community.Weoffer a team oriented environment comprised of military personnel, civilian employees, contractors and volunteers who keep the organization functioning smoothly and effectively.As a service-oriented organization, we never waver in our commitment to our Corps.

This position is located atCAMP HANSEN.Candidates selected for this position will serve as a ELECTRICIAN.

This vacancy is also eligible for the following Employee Benefits.

• 401(k) Retirement Plan with up to a 5% employer match for RFT/RPT.
• NAF Pension Plan that is portable to other qualified government agencies. (May be eligible to buy back military service time).
• International medical and dental insurance (on/off base).
• Inexpensive life insurance covers up to 3x your annual salary.
• Short Term Disability Insurance up to 60% of your salary.
• Tuition Assistance Program (up to $10,000 per year) for certifications, licenses, and college degrees.
• Leave Donation Program for life's emergencies.
• Professional training and development curriculum in technology and leadership.

Major Duties

NONAPPROPRIATED FUND POSITION DESCRIPTION

JOB TITLE: Electrician
JOB SERIES: 2805 PAY LEVEL: NA8/10/11

STATEMENT OF DIFFERENCE:
This position's pay level is NA-08/10/11.

MAJOR DUTIES:
NA08 Grade Level: The work at this grade involves making repairs that can be accomplished by removing, replacing, tightening, splicing, soldering, and insulating defective wiring, controls, equipment, and fixtures such as broken and bare wiring, burned out switches and relays, loose connections and fittings, and damaged light fixtures. Works from job layouts, work sequences, and material requirements that have been determined by an employee of higher level. Requires a knowledge of where fixtures, wiring, and controls, such as light switches, circuit breakers, fuses, relays, and outlets, are installed and how they operate. Incumbent must have the ability to read and follow wiring diagrams that specify where wiring, fixtures, and controls are installed or are to be hooked up and show the type of wiring, fittings, and equipment installed or to be used. Must have skill in the use of hand tools and portable power tools, such as screwdrivers, pliers, wirecutters, strippers, drills, soldering irons, and manual or power conduit benders and threaders; and a limited variety of test equipment. Works under direct supervision/instruction for twenty four (24) months at a minimum rating of meets expectations on the employee performance appraisal, to qualify for the NA10 grade level.

NA10 Grade Level: Performs all duties of the above NA08 with a greater understanding of work planning and the following major duties:
Incumbent installs, modifies, repairs, maintains, troubleshoots, tests, and loads new and existing electrical lines, circuits, systems, associated fixtures, controls and equipment as a skilled journeyman level.

Works from building plans, blueprints, wiring diagrams, engineering, drawings, and electrical maintenance and repair manuals to plan and lay out the routing, replacement, type, size, gauge, balance, load, continuity, and safe operation of electrical lines and lighting, circuits, systems, equipment and controls. In comparison with the NA8 grade electrical workers who work on residential wiring or limited portions of industrial circuitry, electricians at the NA10 grade must have a greater knowledge of how various electrical systems, circuits, equipment, and controls are installed, operate, and work together to support industrial operations, computer complexes, or similar complex electrical loads.

Works under limited supervision/instruction for an additional twenty four (24) months at a minimum rating of meets expectations on the employee performance appraisal to qualify for the NA11 grade level.

NA11 Grade Level: Incumbent performs all duties and responsibilities of the position description at a level above the NA10 grade level major duties and with minimal to no supervision.

Major Duties

DUTIES AND RESPONSIBILITIES:
Disassembles and/or modifies electrical conduits and power circuitry as needed to accomplish work. Retrieves complex modifications to workshop or when specific testing equipment is needed to reconstruct or build a working prototype. Volt meters, ohm meters, meg meters and spike meters are used on field to trouble shoot, locate and repair damaged or poor electrical circuitry. On field duties may require modification of electrical fixtures, equipment with incomplete schematics or drafts.

Studies and develops layouts of electrical systems and construction sketches. Reads and interprets engineer blueprint or manufactures handbook and makes recommendation of changes based on the compliance of Local or National Electrical Codes. Basic repairs are performed by removing, replacing, tightening, splicing, soldering, insulating or modify defective wiring, controls, equipment and fixtures (i.e. bare wiring, burned out switches, defective electrical plugs/relays, loose connections/fittings, damaged light fixtures and thermostats). Ensures work performed is in accordance with National Electrical code or Local Regulation, determines precedence base on local laws.

Inspects facility to ensure requested or planned work is feasible, preparing electrical scopes and reflecting actual conditions and recommending revisions as needed. Analyzes work to accomplish in light of accepted trade practice and prepares rough drafts, plans, material, and sketches of required projects as deemed necessary. Plans and prepares entire scope of projects with detail plans and sketches. Utilizes Engineer Performance Standards to develop man-hour requirements as needed.

Ensures proper construction codes for electrical work are in accordance with local and national standards. Prepares Bill of Material which includes detailed estimate of material required for each work center listing stock number, nomenclature, unit and total price to complete minor constructions and/or capital projects. Determines schedule for accomplishment of projects and serve as a consultant on technical aspects of the job required, inspect and investigate changes either in project, material or labor requirements. Prepares labor material and equipment cost estimates.

Ensures all tenets comply with EEO and Safety Regulations.

Provides World Class Customer Service with an emphasis on courtesy. Assists customers and communicates positively in a friendly manner. Takes action to solve problems quickly. Alerts the higher-level supervisor, or proper point of contact for help when problems arise. Adheres to safety regulations and standards. Promptly reports any observed workplace hazards, and any injury, occupational illness, and/or property damage resulting from workplace mishaps to the immediate supervisor. Adheres to established standards of actively supporting the principles of the EEO program and prevention of sexual harassment.

Performs other related duties as assigned.

Responsibility: Works under the supervision of the designated supervisor or senior grade level. Performs recurring routine repairs independently. The supervisor checks overall work to see that it meets accepted trade standards and is completed in a timely manner.

Physical Effort: Position requires prolonged standing, stooping, bending, kneeling, climbing, and working in tiring positions. Work involves frequently lifting or moving objects up to 45lbs independently and objects over 45lbs with assistance.

Working Conditions: Work is performed both indoors and outside. May be exposed to extreme temperatures, inclement weather, high level of noises, dirt, grease, electrical shock, burns, and possible fall from ladders. May be exposed to high voltage, radiation, chemicals or carcinogens. Must wear issued protective gear.

This position requires traveling from Okinawa, Japan to various locations in the MCIPAC area of responsibility (AOR) that may include: Camp Mujuk, Korea; CATC Camp Fuji, Japan; Darwin, Australia, Guam, and other areas within the MCIPAC region.

Qualifications

BASIC REQUIREMENTS GRADE 08:

Must have basic working knowledge of electrical circuitry to include construction, installation, operation and troubleshooting of electrical equipment.

Basic understanding of electrical schematics and blueprints.

Must have skill in the use of hand tools and portable power tools, such as screwdrivers, pliers, wire cutters, strippers, drills, soldering irons, and manual or power conduit benders and threaders; and a limited variety of test equipment.

Must have the skill needed to measure, cut, and bend wire and conduit to specified lengths and angles.

BASIC REQUIREMENTS GRADE 10:

Must have successfully completed the Penn Foster Career School Residential Electrician Course OR possess an electrician's license.

Must have a greater knowledge of how various electrical systems, circuits, equipment, and controls are installed, operate, and work together to support industrial operations, computer complexes, or similar complex electrical loads.

Must have skill in planning and laying out work, tracing hard-to-locate defects or problems and completing repairs and installations with little or no advice.

Skilled in testing, repairing, modifying, installing, slicing, soldering, insolating, replacing electrical conduit and / or relays.

Must be skilled in reading, maintaining and understanding various types of electrical equipment used to troubleshoot, test and repair electrical fixture or equipment.

A valid Government Owned Vehicle (GOV) operator's permit is required for the performance of duties for this position. Inability to obtain or maintain appropriate GOV licensing will result in termination for lack of qualifications. The incumbent is required to obtain required GOV licenses within 30 days of hire.

BASIC REQUIREMENTS GRADE 11:

Must have thorough working knowledge of sophisticated electrical circuitry to include construction, installation, operation and troubleshooting of electrical equipment.

Knowledge in planning layouts, draft sketch and of electrical constructions, evaluating and estimating man hours and material for minor or capital constructions.

Skilled in testing, repairing, modifying, installing, slicing, soldering, insolating, replacing electrical conduit and / or relays.

Must be skilled in reading, maintaining and understanding various types of electrical equipment used to troubleshoot, test and repair electrical fixture or equipment.

Must have the ability to independently layout electrical circuitry, installation wiring diagram, install strain gauge circuits and modify diagram to meet National Electrical Code.

Must have knowledge of danger signs and intricate warnings of meet electrical malfunction or defective equipment (i.e. power relay, conduit, and switches.

Must be a qualified journeyman or a minimum of 5 years experience in the area of electrical trade.

Must have of obtain 14 hours of Operations & Maintenance to include 2 hours of Asbestos Awareness Training.

This activity is a Drug-free workplace. The use of illegal drugs by NAF employees, whether on or off duty, cannot and will not be tolerated. Federal employees have a right to a safe and secure workplace, and Marines, sailors, and their family members have a right to a reliable and productive Federal workforce.

How To Apply

THIS POSITION IS FOR APPLICANTS CURRENTLY RESIDING IN OKINAWA OR ARRIVING ON OFFICIAL GOVERNMENT ORDERS TO OKINAWA WITHIN 30 DAYS.

All applications must be submitted onlinevia the MCCS Careers website: https://careers.usmc-mccs.org

Resumes/applications emailed or mailed will not be considered for this vacancy announcement. Tobe considered for employment, the application or resume must be submitted online by11:59 PM (ET) on the closing date of the announcement.

Note: To check the status of your application or return to a previous or incomplete application, logintoyourMCCS user account and review your application status.

MILITARY SPOUSE PREFERENCE (MSP) - IAW DoDI 1400.25, Volume 315.

• Applies to positions in grades NF-3 and below, and equivalent Craft & Trades and Child and Youth positions.
• May be exercised once per permanent relocation (PCS), when appointed to a regular full or part time position.
• Per DoDI 1400.25, volume 315, Enclosure 3, para 2.h.1, MSP eligibility terminates upon acceptance or refusal of an offer of a continuing position (part-time or full-time) in the federal service for which the spouse has registered for employment, whether or not preference was applied.
• Applicants hired into flexible positions (0-40 hours per week) or regular position with a time-limited appointment will not lose their spouse preference eligibility until movement or hired into a regular full or part time position.
• The time period for MSP eligibility begins 30 days before the military sponsor's reporting date to the new duty station, if accompanied, or at any time thereafter during the tour.

All military and DoD civilian spouses are required to provide a copy of their sponsor's orders during the application process.

Closing Statement

GENERAL INFORMATION:Applicants are assured of equal consideration regardless of race, age, color, religion, national origin, gender, GINA, political affiliation,membership or non-membership in an employee organization, marital status, physical handicap which has no bearing on the ability to perform the duties of the position. This agency provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency. The decision on granting reasonable accommodation will be on a case-by-case basis.

It is Department of Navy (DON) policy to provide a workplace free of discrimination and retaliation. The DON No Fear Act policy link is provided for your review: https://www.donhr.navy.mil/NoFearAct.asp.

As part of the employment process, Human Resources Division may obtain a Criminal Record Check and/or an Investigative Consumer Report. Employment is contingent upon the successful completion of a National Agency Check and Inquiries (NACI).For all positions requiring access to firearms or ammunition, the Federal Government is prohibited from employing individuals in these positions who have ever been convicted of a misdemeanor crime of domestic violence, or a felony crime of domestic violence adjudged on or after 27 November 2002. Selectees for such positions must submit a completed DD Form 2760, Qualification to Possess Firearms or Ammunition, before a final job offer can be made.

Direct Deposit of total NET pay is mandatory as a condition of employment for all appointments to positions within MCCS.

Required Documents:

*Education/certification certificate(s), if applicable.

*If prior military, DD214 Member Copy

This activity is a Drug-free workplace. The use of illegal drugs by NAF employees, whether on or off duty, cannot and will not be tolerated. Federal employees have a right to a safe and secure workplace, and Marines, sailors, and their family members have a right to a reliable and productive Federal workforce.

Involuntarily separated members of the armed forces and eligible family members applying through the Transition Assistance Program must submit a written request/statement (may be obtained from the MCCS Human Resources Office) and present ID card with "TA" stamped in red on front of card.

INDIVIDUALS SELECTED FROM THIS ANNOUNCEMENT MAY BE CHANGED TO PART-TIME OR FULL-TIME AT MANAGEMENT'S DISCRETION WITHOUT FURTHER COMPETITION.

ALL ONLINE APPLICATIONS MUST BE RECEIVED BY 1159PM EASTERN TIME (ET) ON THE CLOSING DATE LISTED IN THE JOB POSTING.