Equipment Mechanic Trainee I/II/III CDL - Fleet
Abilene, Texas
Employer: Transforce
Industry:
Salary: $19.96 per hour
Job type: Full-Time
GENERAL DESCRIPTION
Under general supervision to perform a variety of skilled work in the repair, overhaul, and preventive maintenance of a variety of vehicular and other mechanical equipment.
SUPERVISION EXERCISED
Fleet Equipment Mechanic Trainee/I/II positions exercise no supervision.
Fleet Equipment Mechanic III may exercise limited supervision as outlined by the supervisor.
IMPORTANT AND ESSENTIAL DUTIES
Inspect, repair, and perform diagnostic checks and troubleshooting techniques on a variety of gasoline and diesel-powered vehicles including landscaping and construction equipment.
Overhaul and/or repair components such as clutches, brakes, transmissions, transfer cases, differentials, universal joints, air conditioning, motor ignitions, carburetors, and electrical and hydraulic systems vehicles such as trucks, trailers, street sweepers, tractors, skid loaders, backhoes, and other equipment as needed.
Adjust and replace necessary units and parts including valves, pistons, brakes, hoses, body parts, switches, hydraulic cylinders, engine parts, and fuel and exhaust components.
Maintain accurate records of maintenance and repairs in Fleet Maintenance software.
Provide Parts staff with complete and accurate information when ordering repair parts.
Maintain personal and common work areas according to established safety standards.
Execute tire mounting and dismounting, as well as rotating and balancing tires.
Operate or test drive heavy equipment, commercial vehicles, medium and light vehicles as well as a wrecker truck. Operation of vehicles is required for diagnosis and verification of repair.
Replace logos, decals, and placards as needed.
OTHER JOB RELATED DUTIES
Perform other job related duties and responsibilities as assigned.
KNOWLEDGE, SKILLS, AND ABILITIES
Knowledge of:
Methods and procedures, tools, equipment, and materials used in the diagnosis, repair and maintenance of vehicles and equipment.
Applicable safety standards for vehicles, equipment, and work areas.
Safe driving principles and practices.
Full range of automotive, diesel, and equipment mechanics.
Skill to:
Operate equipment and tools including hydraulic jack, air jack, drill press, crane truck, dozer, backhoe, tractor, refuse truck, car, pick-up, and wrecker.
Ability to:
Follow oral and written instructions.
Communicate clearly and concisely, both orally and in writing.
Establish and maintain cooperative working relationships with those contacted in the course of work, both internally and externally.
Follow and embrace the City of Abilene Core Values - Respect, Integrity, Service Above Self, and Excellence in All We Do.
Perform as a team member in a manner that accomplishes the Division's mission and treats team members with dignity, courtesy, and respect.
Equipment Mechanic III
Lead, manage, and perform as a team member in a manner that accomplishes the Division's mission and treats team members with dignity, courtesy, and respect.
Experience and Training Guidelines:
For positions with more than one level, all listed requirements at the lower levels are required at the higher levels. Any combination equivalent to experience and training to provide the required knowledge, skills, and abilities may be qualifying. Knowledge, skills, and abilities may be obtained through:
Equipment Mechanic Trainee
Experience:
This is an entry-level position. At least eighteen (18) months of related experience is preferred.
Education/Training:
A high school diploma or a GED is required.
License or Certificate:
A valid Texas Class B CDL driver's license or the ability to obtain one within ninety (90) days of employment is required.
Equipment Mechanic Trainee I
Experience:
This is an entry-level position. At least eighteen (18) months of related experience is preferred.
Education/Training:
A high school diploma or a GED is required.
License or Certificate:
A valid Texas Class B CDL driver's license is required.
Equipment Mechanic II
Experience:
Three (3) years of experience equivalent to that of an Equipment Mechanic I for the City of Abilene is required.
Education/Training:
A high school diploma or a GED is required.
Depending upon assigned location within Fleet Maintenance, one or more of the following is required:
Completion of training courses leading to any of the Automotive Service Excellence (ASE) Certification Tests. Courses recommended, but are not limited to: Automobile & Light Truck Certification Tests (A1 - A9) or Heavy Duty Trucks Certification Tests (T1 - T8).
A valid Texas Class B CDL driver's license is required.
Equipment Mechanic III
Experience:
Five (5) years of experience equivalent to that of an Equipment Mechanic II or a full journey level Equipment Mechanic is required.
Education/Training:
A high school diploma or a GED is required.
Completion of the Automotive Service Excellence (ASE) Certification Tests related to appropriate mechanical field within Fleet Maintenance is required.
A valid Texas Class B CDL driver's license is required.
Special Requirements:
Essential duties require the following physical skills and work environment:
Bloodborne Pathogens training and HazCom training are required within sixty (60) days of employment.
Work requires considerable independent judgment in selecting work methods and procedures.
Must provide their own tools appropriate to position level.
Exposure to cold, heat, noise, outdoors, vibration, confined workspaces, chemicals, explosive materials, mechanical hazards, and electrical hazards.
Must travel to different sites.
Considered Essential Personnel in the event of City Offices closure and reports to work as assigned by the Director.
With or without accommodation, the "X" indicates the overall strength demand of the position during a typical workday:
___ Sedentary - lifting of no more than 10 pounds
___ Light - lifting no more than 20 pounds; carrying up to 10 pounds
___ Medium - lifting no more than 50 pounds; carrying up to 25 pounds
X Heavy - lifting no more than 100 pounds; carrying up to 50 pounds
___ Very Heavy - team lifting over 100 pounds; carrying more than 50 pounds
Physical Demand Codes: The following describes whether or not the position is expected to exert the physical demands listed during a typical workday as well as the overall frequency of the task:
Codes for how often:
N = No
E = Extensive (100 - 70% of the time)
M = Moderate (60 - 30% of the time)
I = Infrequent (20 - 10% of the time)
A = Almost Never (
Code / Task
E Standing
I Sitting
E Walking
E Lifting
M Carrying
M Pushing/Pulling
M Overhead Work
M Fine Dexterity
M Kneeling
M Crouching
I Crawling
M Bending
M Twisting
M Climbing
I Balancing
E Vision
E Hearing
M Talking
_ Other: ___
Other details
Under general supervision to perform a variety of skilled work in the repair, overhaul, and preventive maintenance of a variety of vehicular and other mechanical equipment.
SUPERVISION EXERCISED
Fleet Equipment Mechanic Trainee/I/II positions exercise no supervision.
Fleet Equipment Mechanic III may exercise limited supervision as outlined by the supervisor.
IMPORTANT AND ESSENTIAL DUTIES
Inspect, repair, and perform diagnostic checks and troubleshooting techniques on a variety of gasoline and diesel-powered vehicles including landscaping and construction equipment.
Overhaul and/or repair components such as clutches, brakes, transmissions, transfer cases, differentials, universal joints, air conditioning, motor ignitions, carburetors, and electrical and hydraulic systems vehicles such as trucks, trailers, street sweepers, tractors, skid loaders, backhoes, and other equipment as needed.
Adjust and replace necessary units and parts including valves, pistons, brakes, hoses, body parts, switches, hydraulic cylinders, engine parts, and fuel and exhaust components.
Maintain accurate records of maintenance and repairs in Fleet Maintenance software.
Provide Parts staff with complete and accurate information when ordering repair parts.
Maintain personal and common work areas according to established safety standards.
Execute tire mounting and dismounting, as well as rotating and balancing tires.
Operate or test drive heavy equipment, commercial vehicles, medium and light vehicles as well as a wrecker truck. Operation of vehicles is required for diagnosis and verification of repair.
Replace logos, decals, and placards as needed.
OTHER JOB RELATED DUTIES
Perform other job related duties and responsibilities as assigned.
KNOWLEDGE, SKILLS, AND ABILITIES
Knowledge of:
Methods and procedures, tools, equipment, and materials used in the diagnosis, repair and maintenance of vehicles and equipment.
Applicable safety standards for vehicles, equipment, and work areas.
Safe driving principles and practices.
Full range of automotive, diesel, and equipment mechanics.
Skill to:
Operate equipment and tools including hydraulic jack, air jack, drill press, crane truck, dozer, backhoe, tractor, refuse truck, car, pick-up, and wrecker.
Ability to:
Follow oral and written instructions.
Communicate clearly and concisely, both orally and in writing.
Establish and maintain cooperative working relationships with those contacted in the course of work, both internally and externally.
Follow and embrace the City of Abilene Core Values - Respect, Integrity, Service Above Self, and Excellence in All We Do.
Perform as a team member in a manner that accomplishes the Division's mission and treats team members with dignity, courtesy, and respect.
Equipment Mechanic III
Lead, manage, and perform as a team member in a manner that accomplishes the Division's mission and treats team members with dignity, courtesy, and respect.
Experience and Training Guidelines:
For positions with more than one level, all listed requirements at the lower levels are required at the higher levels. Any combination equivalent to experience and training to provide the required knowledge, skills, and abilities may be qualifying. Knowledge, skills, and abilities may be obtained through:
Equipment Mechanic Trainee
Experience:
This is an entry-level position. At least eighteen (18) months of related experience is preferred.
Education/Training:
A high school diploma or a GED is required.
License or Certificate:
A valid Texas Class B CDL driver's license or the ability to obtain one within ninety (90) days of employment is required.
Equipment Mechanic Trainee I
Experience:
This is an entry-level position. At least eighteen (18) months of related experience is preferred.
Education/Training:
A high school diploma or a GED is required.
License or Certificate:
A valid Texas Class B CDL driver's license is required.
Equipment Mechanic II
Experience:
Three (3) years of experience equivalent to that of an Equipment Mechanic I for the City of Abilene is required.
Education/Training:
A high school diploma or a GED is required.
Depending upon assigned location within Fleet Maintenance, one or more of the following is required:
Completion of training courses leading to any of the Automotive Service Excellence (ASE) Certification Tests. Courses recommended, but are not limited to: Automobile & Light Truck Certification Tests (A1 - A9) or Heavy Duty Trucks Certification Tests (T1 - T8).
- Factory training directly related to City owned equipment can be used to complete the Educational and Testing requirement.
A valid Texas Class B CDL driver's license is required.
Equipment Mechanic III
Experience:
Five (5) years of experience equivalent to that of an Equipment Mechanic II or a full journey level Equipment Mechanic is required.
Education/Training:
A high school diploma or a GED is required.
Completion of the Automotive Service Excellence (ASE) Certification Tests related to appropriate mechanical field within Fleet Maintenance is required.
- For example: Automobile Test A1-A9 for light vehicle mechanics or Medium and Heavy Truck Test T1-T8 for heavy truck or equipment mechanics. Similar level of achievement in OEM (Ford, Chevrolet, Dodge, Cummins, Autocar, Freightliner, and Caterpillar) coursework may be substituted for ASE Test completion. Work performed must be consistent with industry standards and benchmarks.
A valid Texas Class B CDL driver's license is required.
Special Requirements:
Essential duties require the following physical skills and work environment:
Bloodborne Pathogens training and HazCom training are required within sixty (60) days of employment.
Work requires considerable independent judgment in selecting work methods and procedures.
Must provide their own tools appropriate to position level.
Exposure to cold, heat, noise, outdoors, vibration, confined workspaces, chemicals, explosive materials, mechanical hazards, and electrical hazards.
Must travel to different sites.
Considered Essential Personnel in the event of City Offices closure and reports to work as assigned by the Director.
With or without accommodation, the "X" indicates the overall strength demand of the position during a typical workday:
___ Sedentary - lifting of no more than 10 pounds
___ Light - lifting no more than 20 pounds; carrying up to 10 pounds
___ Medium - lifting no more than 50 pounds; carrying up to 25 pounds
X Heavy - lifting no more than 100 pounds; carrying up to 50 pounds
___ Very Heavy - team lifting over 100 pounds; carrying more than 50 pounds
Physical Demand Codes: The following describes whether or not the position is expected to exert the physical demands listed during a typical workday as well as the overall frequency of the task:
Codes for how often:
N = No
E = Extensive (100 - 70% of the time)
M = Moderate (60 - 30% of the time)
I = Infrequent (20 - 10% of the time)
A = Almost Never (
Code / Task
E Standing
I Sitting
E Walking
E Lifting
M Carrying
M Pushing/Pulling
M Overhead Work
M Fine Dexterity
M Kneeling
M Crouching
I Crawling
M Bending
M Twisting
M Climbing
I Balancing
E Vision
E Hearing
M Talking
_ Other: ___
Other details
- Pay Type Hourly
- Min Hiring Rate $19.96
- Max Hiring Rate $30.23
- Fleet Maintenance, 898 Sandy, Abilene, Texas, United States of America
Created: 2024-09-28
Reference: XOrOhST9aJtB
Country: United States
State: Texas
City: Abilene
ZIP: 79605
Similar jobs:
-
Local CDL A Driver needed! - $21/hr
Transforce in Dallas, Texas💸 $21 per hour -
Truck Driver CDL A Home Daily
Haul in Coppell, Texas💸 $25.00 per hour -
CDL Bus Drivers - Laredo, TX
Greyhound in Laredo, Texas💸 $50000 - $60000 per year -
CDL Truck Driver
Transforce in Fort Worth, Texas💸 $26.00 per hour -
Route Service Delivery Driver CDL
BlueTriton in Austin, Texas -
Non-CDL Driver - Street Sweeping
Transforce in Houston, Texas💸 $15 per hour -
CDL-A Regional Truck Driver
Haul in Dallas, Texas💸 $90000 per year -
CDL-A Production and Event Truck Driver
Haul in Grand Prairie, Texas💸 $1800 per week -
Bus Driver-CDL Required-VTC
Valley Transit in Brownsville, Texas -
NON CDL Delivery Driver
Transforce in Round Rock, Texas -
CDL-A Team Truck Driver
Haul in El Paso, Texas -
CDL Truck Driver Home Daily
UGI Utilities in Arlington, Texas -
CDL-A Truck Driver-Dedicated Home Weekly in Houston, TX
Covenant Transport in Houston, Texas -
CDL-A Truck Driver - Earn up to $100k
Tyson Foods in Waco, Texas💸 $85000 per year -
CDL A - Regional Truck Driver in Pineland, TX
Blackhawk Transport in Pineland, Texas💸 $85000 per year -
CDL TRUCK DRIVER
McLane Company, Inc. in Round Rock, Texas -
Dedicated Regional CDL A Truck Driver | Odessa, TX
Knight Transportation in Odessa, Texas💸 $93000 per year -
CDL-A Company Truck Drivers
Kenan Advantage Group, Inc. in Brownwood, Texas💸 $70000 per year -
CDL-A Dedicated Truck Drivers
Kenan Advantage Group, Inc. in Beaumont, Texas💸 $2000 - $2300 per week -
CDL-A Truck Drivers: Get home daily on shuttle, short-haul, or local runs!
JBS Carriers in Nacogdoches, Texas💸 $18 per hour