Outside Machinist II (LCS)
National City, California
Employer: Epsilon Systems Solutions
Industry: Southwest Region - San Diego
Salary: $22.11 - $32.13 per hour
Job type: Full-Time
Epsilon Systems Solutions, Inc. is currently seeking a full-time Outside Machinist II in National City, CA
Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.
Responsibilities:
Requirements:
Pay Range
ADA Notations :
Epsilon Systems Solutions, Inc. and its subsidiaries are proud to be Equal Employment Opportunity and Affirmative Action employers, Minority/Female/Disabled/Veterans.
Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.
Responsibilities:
- Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
- Insures that all Epsilon Systems Ship Repair Sector Personal Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
- Strictly adheres to safety, quality standards.
- Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
- Insures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.
- Insures that all requirements of the Epsilon Systems Ship Repair Sector Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
- Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
- Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
- Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
- Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
- Performs and/or verifies mechanical alignments.
- Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Ship Repair Sector Instructions.
- Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
- Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
- Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
- Assists in rigging when necessary.
- Other duties as assigned.
Requirements:
- High School/GED /Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard.
- 5 years' US Navy experience.
- Experience performing PMS checks onboard surface ships or submarines.
- Understanding of US Navy 3M System and associated documentation requirements.
- Has knowledge of the trade qualifications and performs as a level II Outside Machinist.
- Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
- Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting) and blue print reading.
- Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
- Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment. Will assist in rigging evolutions when necessary.
- Communicates effectively
- Works independently or in a group.
- Ability to do basic math, i.e. add, subtract, divide and multiply.
- Ability to read, write, speak, and comprehend English.
- Able to obtain and maintain access to military and government installations and private shipyards worldwide.
- Ability to travel.
Pay Range
- The pay range for this is $22.11 to $32.13 per hour. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications such as skills, education and experience.
ADA Notations :
- Requires walking, reaching, sitting and concentration in the presence of occasional noise.
- Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
- Able to lift, carry and move objects up to 50 lbs. in weight.
- Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
- Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
- Able to perceive and distinguish normal range of colors.
- May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
Epsilon Systems Solutions, Inc. and its subsidiaries are proud to be Equal Employment Opportunity and Affirmative Action employers, Minority/Female/Disabled/Veterans.
Created: 2024-08-22
Reference: 2024-360
Country: United States
State: California
City: National City
Similar jobs:
-
Outside Machinist
General Dynamics Corporation in San Diego, California -
Outside Machinist III
Epsilon Systems Solutions in National City, California💸 $24.22 - $35.35 per hour -
Outside Machinist II
Epsilon Systems Solutions in San Diego, California💸 $32.30 per hour -
Outside Machinist Specialist
Epsilon Systems Solutions in National City, California💸 $28.51 - $41.74 per hour -
Outside Machinist I
Epsilon Systems Solutions in National City, California💸 $19.69 - $28.67 per hour -
Outside Machinist-Journeyman
General Dynamics Corporation in San Diego, California