Sustaining Electrical Engineer
Scottsdale, Arizona
Employer: Insight Global
Industry: Electrical Engineering
Salary: Competitive
Job type: Part-Time
As a member of the Video Electrical Engineering team, you will own the design, development, testing, and sustainability of video product systems. Your responsibilities include reviewing data sheets to find reputable solutions, assessing whether a design change is required, creating new design, and testing the new change to verify the new components adaptation.
Make relevant design changes to Bills of Material (BOMs), Schematics, Layouts as needed for the change request.
Interface with ME and FW teams to ensure cross functional input and understanding of changes
Interface with suppliers to select and finalize design changes
Support validation team with developing test plan, triage issues, and finalize changes per company processes.
Drive change request to completion by following company change control process using Arena PLM tools and process knowledge.
Research, propose, and develop subsystems and circuit solutions for Worn Cameras, In-Car Camera Systems and/or their accessory electronics.
Using OrCAD Schematic tools, design embedded Mixed-Signal/Analog/Digital electronic circuits that may integrate application processors, image sensors, high- and low-speed data interfaces (DDR, USB, I2C, SPI), switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, and discrete digital and analog components.
Evaluate performance of circuits and assess compliance to product and regulatory requirements.
Optimize performance of electronics design
Assess and document design outcomes, test results, and related information and present information to design teams.
Work with component and development partners to select, evaluate, and approve electronics designs.
We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com .
To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/ .
Required Skills & Experience
Bachelors degree in Electrical Engineering or similar
4+ years in an Electrical Engineer role
1+ of which have had a focus in design for consumer/mass production
Exposure to RF integration (eq. Bluetooth, BLE, Wifi, GNSS, Cellular)
Proficiency identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released products.
Experience performing tests and debugs (majority are hands on)
Verifying components are performing to expectations
Familiar with component selection and verification requirements in some of the following example areas:
Passive components (RLC), transistors, power supplies (SMPS, LDO, other regulators), signal and power switches, microcontrollers, high-speed and low-speed memory (LPDDRx, eMMC, EEPROM), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), LEDs, SMT connectors, batteries and battery packs, PCBs, etc
Nice to Have Skills & Experience
Preferred design experience with tablets, action cameras, wearable products, infotainment and/or similar consumer mass production devices
Allegro (Cadence) Designer experience is a HUGE plus
Experience designing video camera systems and/or in-vehicle electronics
Experience integrating wireless systems such as LTE, WiFi, Bluetooth, BLE.
Experience designing products to regulatory standards (FCC, CE, IEC).
Experience with FPGA integration
Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.
Make relevant design changes to Bills of Material (BOMs), Schematics, Layouts as needed for the change request.
Interface with ME and FW teams to ensure cross functional input and understanding of changes
Interface with suppliers to select and finalize design changes
Support validation team with developing test plan, triage issues, and finalize changes per company processes.
Drive change request to completion by following company change control process using Arena PLM tools and process knowledge.
Research, propose, and develop subsystems and circuit solutions for Worn Cameras, In-Car Camera Systems and/or their accessory electronics.
Using OrCAD Schematic tools, design embedded Mixed-Signal/Analog/Digital electronic circuits that may integrate application processors, image sensors, high- and low-speed data interfaces (DDR, USB, I2C, SPI), switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, and discrete digital and analog components.
Evaluate performance of circuits and assess compliance to product and regulatory requirements.
Optimize performance of electronics design
Assess and document design outcomes, test results, and related information and present information to design teams.
Work with component and development partners to select, evaluate, and approve electronics designs.
We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to HR@insightglobal.com .
To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: https://insightglobal.com/workforce-privacy-policy/ .
Required Skills & Experience
Bachelors degree in Electrical Engineering or similar
4+ years in an Electrical Engineer role
1+ of which have had a focus in design for consumer/mass production
Exposure to RF integration (eq. Bluetooth, BLE, Wifi, GNSS, Cellular)
Proficiency identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released products.
Experience performing tests and debugs (majority are hands on)
Verifying components are performing to expectations
Familiar with component selection and verification requirements in some of the following example areas:
Passive components (RLC), transistors, power supplies (SMPS, LDO, other regulators), signal and power switches, microcontrollers, high-speed and low-speed memory (LPDDRx, eMMC, EEPROM), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), LEDs, SMT connectors, batteries and battery packs, PCBs, etc
Nice to Have Skills & Experience
Preferred design experience with tablets, action cameras, wearable products, infotainment and/or similar consumer mass production devices
Allegro (Cadence) Designer experience is a HUGE plus
Experience designing video camera systems and/or in-vehicle electronics
Experience integrating wireless systems such as LTE, WiFi, Bluetooth, BLE.
Experience designing products to regulatory standards (FCC, CE, IEC).
Experience with FPGA integration
Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.
Created: 2024-04-16
Reference: 351264
Country: United States
State: Arizona
City: Scottsdale
ZIP: 85259
Similar jobs:
-
Building Engineer - Electrical - State Farm Stadium
AEG in Glendale, Arizona -
Electrical Engineer 4 - Substation Design - Phoenix, AZ (Hybrid)
Black and Veatch in Phoenix, Arizona -
Staff Electrical Engineer - Networks, Integration, & Automation (Phoenix/Tucson)
Burns & McDonnell in Tucson, Arizona -
Sr. Electrical Engineer (Phoenix, AZ)
Jacobs in Tempe, Arizona -
Engineering - Engineer Electrical 2
Indotronix International Corporation in Chandler, Arizona -
Assistant Electrical Engineer- Transmission & Distribution (Phoenix)
Burns & McDonnell in Phoenix, Arizona -
Electrical Engineer (Pathways Recent Graduate)
Bureau of Reclamation in Page, Arizona -
Electrical Component Engineer
Apex Systems in Scottsdale, Arizona -
Electrical Construction Project Engineer
Insight Global in Phoenix, Arizona -
Electrical Engineer
Bureau of Reclamation in Page, Arizona -
Staff Electrical Engineer - Substation
Burns & McDonnell in Phoenix, Arizona -
Electrical Engineer - Client Facing
Jacobs in Tempe, Arizona -
Engineering - Engineer Electrical 3
Indotronix International Corporation in Chandler, Arizona -
Electrical Project Engineer (hybrid / Phoenix, AZ)
Jacobs in Tempe, Arizona -
Electrical Engineer
Stantec in CHANDLER, Arizona -
Electrical Engineer Intern - Summer 2024
Stantec in CHANDLER, Arizona -
Principal, Healthcare Electrical Engineering
Stantec in CHANDLER, Arizona -
Electrical Engineer
Bureau of Reclamation in Page, Arizona -
Engineering - Engineer Electrical 3
Indotronix International Corporation in Chandler, Arizona -
Electrical Engineer, Buildings
Stantec in PHOENIX, Arizona