ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC (TITLE 32)
Camp Blanding, Florida
Employer: Army National Guard Units
Industry: Electronic Measurement Equipment Mechanic
Salary: Competitive
Job type: Full-Time
Summary
This National Guard position is for an Electronic Measurement Equipment Mechanic (T32), Position Description Number D1201000 and is part of the CSMS, Camp Blanding, Florida National Guard.
This job is open to
Clarification from the agency
Applicants eligible and willing to join the state National Guard
Duties
As an Electronic Measurement Equipment Mechanic, WG-2602-11, you will calibrate and repair TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc. Perform functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements. Align, troubleshoot, test, inspect, repair, modify, calibrate and certify precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters. Analyze and isolate component malfunctions; calculate and determine tolerances; and perform tests and calibrations in accordance with instructions, which are often vague and incomplete, and may require the preparation of diagrams and instructions to facilitate the calibration action.
PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods, requiring frequent bending, reaching, stretching, climbing, and crouching. Works in cramped or awkward positions, on top of and under equipment. Performs strenuous work while standing, lying, or sitting. Frequently lifts and handles items weighing up to 40 pounds, or occasionally heavier items, with the assistance of other workers. Work requires sitting for extended periods of time, and frequent standing, walking, bending, reaching, and stooping. May work from ladders and platforms, at varying heights.
WORKING CONDITIONS: Work is normally performed in well lighted, humidity and temperature controlled shops. There are dangers from high voltage electrical shock, RF energy, radiation exposure and contamination, burns from soldering irons, high-pressure air and high-pressure hydraulics. Frequently exposed to the possibility of cuts, burns, or bruises, and sprains while repairing, positioning, and moving equipment. May use safety equipment for extended periods such as protective ear devices, eye protection, hard hats, hard-toe shoes, respirators, and protective clothing.
Requirements
Conditions of Employment
Qualifications
AREA OF CONSIDERATION: This position is in the Excepted Federal Civil Service "under the authority of 32 U.S.C. 709", and is open to Category 1: All permanent/indefinite (T32 and T5) technicians employed by the agency Category 3: All current military members of the Florida National Guard; and Category 4: All individuals who qualify for membership in the Florida National Guard and are willing to become T32 Dual Status technicians. First consideration will be given to Category 1.
PCS: Permanent Change of Station (PCS) MAY be authorized. Authorization for payment of PCS expenses will be granted ONLY after determination is made that payment is in the best interest of the Florida National Guard.
FLARNG BUS Code NG5022: This position is "included" in the bargaining unit and eligible for labor organization representation. The current exclusive representative is The Association of Civilian Technicians, Chapter 87 and the President is Mr. Michael Ortmayer at actch87@gmail.com or (904) 573-2300 ext 1023.
MILITARY GRADES: Enlisted/Warrant Officer; E1 thru WO1.
GENERAL EXPERIENCE: Must have experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance.; experience in the use of various precision measurement instruments and standards.
SPECIALIZED EXPERIENCE: WG-11 must have at least 18 months of experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment.
Education
If you are using Education to qualify for this position, you must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Knowledge of Equipment Assembly, Installation, Repair, etc., Theory of Electronics, Trouble shooting (Electronic Equipment), and Use of Test Equipment: Electronics
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Your Resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: Transcripts, SF50 (if applicable).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12378562~
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Agency contact information
FLNG-Staffing-Distro Cert-Staffing-Distro
Email
ng.fl.flarng.list.job-tech-fl@army.mil
Address
FL SMO
5629 SR 16 W
Starke, FL 32091
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This National Guard position is for an Electronic Measurement Equipment Mechanic (T32), Position Description Number D1201000 and is part of the CSMS, Camp Blanding, Florida National Guard.
This job is open to
- National Guard & reserves
Current members, those who want to join or transitioning military members.
Clarification from the agency
Applicants eligible and willing to join the state National Guard
Duties
As an Electronic Measurement Equipment Mechanic, WG-2602-11, you will calibrate and repair TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc. Perform functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements. Align, troubleshoot, test, inspect, repair, modify, calibrate and certify precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters. Analyze and isolate component malfunctions; calculate and determine tolerances; and perform tests and calibrations in accordance with instructions, which are often vague and incomplete, and may require the preparation of diagrams and instructions to facilitate the calibration action.
PHYSICAL EFFORT: Work is performed in tiring or uncomfortable positions for long periods, requiring frequent bending, reaching, stretching, climbing, and crouching. Works in cramped or awkward positions, on top of and under equipment. Performs strenuous work while standing, lying, or sitting. Frequently lifts and handles items weighing up to 40 pounds, or occasionally heavier items, with the assistance of other workers. Work requires sitting for extended periods of time, and frequent standing, walking, bending, reaching, and stooping. May work from ladders and platforms, at varying heights.
WORKING CONDITIONS: Work is normally performed in well lighted, humidity and temperature controlled shops. There are dangers from high voltage electrical shock, RF energy, radiation exposure and contamination, burns from soldering irons, high-pressure air and high-pressure hydraulics. Frequently exposed to the possibility of cuts, burns, or bruises, and sprains while repairing, positioning, and moving equipment. May use safety equipment for extended periods such as protective ear devices, eye protection, hard hats, hard-toe shoes, respirators, and protective clothing.
Requirements
Conditions of Employment
- APPLICANTS SHOULD CONTACT THEIR STATE INCENTIVES MANAGER TO DETERMINE IF ACCEPTING THIS POSITION WILL AFFECT ANY BONUS RECEIVED FROM THE MILITARY.
- This is an excepted service position that requires membership in compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Security Clearance requirements are determined by position and/or MOS/AFSC compatibility.
- Enrollment in Direct Deposit is mandatory.
- May be required to successfully complete a probationary period.
- Males born after 31 December 1959 must be registered for Selective Service.
Qualifications
AREA OF CONSIDERATION: This position is in the Excepted Federal Civil Service "under the authority of 32 U.S.C. 709", and is open to Category 1: All permanent/indefinite (T32 and T5) technicians employed by the agency Category 3: All current military members of the Florida National Guard; and Category 4: All individuals who qualify for membership in the Florida National Guard and are willing to become T32 Dual Status technicians. First consideration will be given to Category 1.
PCS: Permanent Change of Station (PCS) MAY be authorized. Authorization for payment of PCS expenses will be granted ONLY after determination is made that payment is in the best interest of the Florida National Guard.
FLARNG BUS Code NG5022: This position is "included" in the bargaining unit and eligible for labor organization representation. The current exclusive representative is The Association of Civilian Technicians, Chapter 87 and the President is Mr. Michael Ortmayer at actch87@gmail.com or (904) 573-2300 ext 1023.
MILITARY GRADES: Enlisted/Warrant Officer; E1 thru WO1.
GENERAL EXPERIENCE: Must have experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance.; experience in the use of various precision measurement instruments and standards.
SPECIALIZED EXPERIENCE: WG-11 must have at least 18 months of experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment.
Education
If you are using Education to qualify for this position, you must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
- Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Knowledge of Equipment Assembly, Installation, Repair, etc., Theory of Electronics, Trouble shooting (Electronic Equipment), and Use of Test Equipment: Electronics
- Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To apply for this position, you must submit a complete Application Package which includes:
1. Your Resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: Transcripts, SF50 (if applicable).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. - How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12378562~
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Agency contact information
FLNG-Staffing-Distro Cert-Staffing-Distro
Email
ng.fl.flarng.list.job-tech-fl@army.mil
Address
FL SMO
5629 SR 16 W
Starke, FL 32091
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.- Equal Employment Opportunity (EEO) Policy
- Reasonable accommodation policy
- Financial suitability
- Selective Service
- New employee probationary period
- Signature and false statements
- Privacy Act
- Social security number request
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Your Resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: Transcripts, SF50 (if applicable).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12378562~
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Agency contact information
FLNG-Staffing-Distro Cert-Staffing-Distro
ng.fl.flarng.list.job-tech-fl@army.mil
Address
FL SMO
5629 SR 16 W
Starke, FL 32091
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Equal Employment Opportunity (EEO) Policy
- Reasonable accommodation policy
- Financial suitability
- Selective Service
- New employee probationary period
- Signature and false statements
- Privacy Act
- Social security number request
Created: 2024-04-19
Reference: 786922500
Country: United States
State: Florida
City: Camp Blanding
Similar jobs:
-
Equipment Mechanic - Shop
Altec in Tampa, Florida💸 $56000 - $70000 per year -
Small Equipment/Power Equipment Mechanic
Jr. Davis Construction in Kissimmee, Florida -
Senior Equipment Maintenance Mechanic
UNFI in Pompano Beach, Florida -
AIR CONDITIONING EQUIPMENT MECHANIC
Naval Facilities Engineering Systems Command in Panama City Naval Surface Warfare Center, Florida -
Auto Equipment Mechanic
University of North Florida in Jacksonville, Florida💸 $38993.10 per year -
Heavy Equipment Mechanic
Transforce in Kissimmee, Florida -
ELECTROMOTIVE EQUIPMENT MECHANIC (GOLF CART)
United States Space Force in Patrick AFB, Florida -
Experienced Heavy Equipment Diesel Mechanic
Jr. Davis Construction in Kissimmee, Florida -
Turf Equipment Mechanic
Orion Talent in Sarasota, Florida💸 $28 - $30 per hour -
Equipment Mechanic - Shop
Altec in Jacksonville, Florida💸 $56000 - $70000 per year -
Heavy Equipment Mechanic
Kikiktagruk Inupiat Corp in Jacksonville, Florida💸 $33.27 per hour -
Heavy Equipment Mechanic
Transforce in Bradley, Florida💸 $52000 per year -
Equipment Mechanic - Field
Altec in West Palm Beach, Florida💸 $60000 - $75000 per year -
Senior Mechanical Engineer- Test Equipment
Naval Systems Inc in Jacksonville, Florida -
Turf Equipment Mechanic
Orion Talent in Deerfield Beach, Florida💸 $31 - $33 per hour -
Equipment Mechanic - Shop
Altec in Riviera Beach, Florida💸 $56000 - $70000 per year -
Heavy Equipment Mechanic
The Middlesex in Orlando, Florida -
Heavy Equipment Mechanic
Transforce in Bradley, Florida💸 $62400 per year -
AIR CONDITIONING EQUIPMENT MECHANIC
Naval Facilities Engineering Systems Command in Key West, Florida