Mold Machine Operator A - Deer Creek (Portland, OR)
Milwaukie, Oregon
Employer: Precision Castparts Corp.
Industry: Operations
Salary: Competitive
Job type: Full-Time
MISSION :
To operate molding machines to produce small and/or less complex wax pattern and gating components of the highest quality. To inspect, trim and clean wax parts as required. To train less experienced operators as assigned.
PRINCIPAL ACCOUNTABILITIES:
Tooling Preparation
Objective: To accurately prepare tooling dies for operation.
Essential Job Functions:
Objective: To operate complex molding machines accurately and efficiently using technique cards and established set-up procedures to maintain quality and dimensional integrity of the product.
Essential Job Functions:
Safety
Objective: to take responsibility for and demonstrate safe work practices.
Essential Job Functions:
Meets all production and quality standards.
OTHER MARGINAL ACCOUNTABILITIES:
ESSENTIAL EQUIPMENT, VEHICLES, MACHINERY AND/OR TOOLS USED:
TRAINING
Training is provided on the job.
PCC's Forklift Driving Safety Certification Training must be completed.
May be required to complete Hazardous Waste Management Training.
QUALIFICATIONS
In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings. Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov
/*generated inline style */
Primary Duties & Responsibilities
PRINCIPAL ACCOUNTABILITIES:
1. Tooling Preparation
Objective: to accurately prepare tooling dies for operation.
Essential Job Functions:
A. Assembles disassembles, prepares and positions tooling dies for operation; changes die inserts as required.
B. Adds chills and solubles per tech cards.
C. Removes and/or cleans tooling after operation.
2. Mold Machine Operation
Objective: To operate moderately complex molding machines accurately and efficiently using technique cards and established setup procedures. To maintain dimensional integrity of product.
Essential Job Functions:
A. Sets up, monitors, and controls mold machine functions.
B. Keeps dies clean during molding operations.
C. Removes wax parts from die, inspects for defects, and trims.
D. Cleans wax parts as required.
3. Completes logs and records; documents any modifications to process.
4. Meets all production and quality standards.
5. Safety
Objective: to take responsibility for and demonstrate safe work practices.
Essential Job Functions:
A. Adheres to plant and department safety rules.
B. Safely operates all equipment and tools.
C. Identifies and reports safety problems.
OTHER (MARGINAL) ACCOUNTABILITIES:
6. May train less skilled operators as assigned.
7. Performs other tasks as directed.
8. May be required to work with hazardous waste.
ESSENTIAL EQUIPMENT, MACHINERY AND/OR TOOLS USED:
1. Pry bars
2. Side cutters and/or knives
3. Mallets
4. Torches and air nozzles
5. Air ratchet
6. Wrenches; allen and crescent
7. Power drill
8. Flashlight
9. Hoist
10. Dental picks
11. Mold Machines
/*generated inline style */
Experience & Education
TRAINING:
1. Training is provided on the job.
2. May be required to complete Hazardous Waste Management Training.
/*generated inline style */
Required Skills
QUALIFICATIONS:
1. Skill in wax molding operations, as demonstrated by three to six months of competent performance in any wax molding utility, leach tank or core/gate cleaner positions is preferred
OR
any equivalent combination of training and work experience.
2. Ability to read, interpret and follow specifications on Technique Cards, Process Control Procedures and other special instructions.
3. Ability to perform basic mathematical calculations. (addition, subtraction, multiplication and division)
4. Ability to work alone with limited supervision.
5. Written language skills required.
6. Physical ability to perform the essential job functions.
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
To operate molding machines to produce small and/or less complex wax pattern and gating components of the highest quality. To inspect, trim and clean wax parts as required. To train less experienced operators as assigned.
PRINCIPAL ACCOUNTABILITIES:
Tooling Preparation
Objective: To accurately prepare tooling dies for operation.
Essential Job Functions:
- Assembles, disassembles, prepares and positions tooling dies for operation; changes die inserts as required.
- Adds chills and solubles per Technique Cards.
- Removes and cleans tooling after operation.
- Performs minor repairs on tooling as required (TBO, LSBO only).
Objective: To operate complex molding machines accurately and efficiently using technique cards and established set-up procedures to maintain quality and dimensional integrity of the product.
Essential Job Functions:
- Sets up, monitors and controls mold machine functions.
- Keeps dies and/or inserts clean during molding machine operations.
- Removes wax parts from die, inspects for defects, and trims.
- Places on proper fixtures in order to maintain dimensional integrity of parts.
- Ensures proper wax supplies are maintained for mold machine operation.
- Initiates and implements corrective action to resolve quality and tooling problems as needed.
- Develops and assists in tech card creation.
- Completes logs and records.
- Documents all modifications to process.
Safety
Objective: to take responsibility for and demonstrate safe work practices.
Essential Job Functions:
- A Adheres to plant and department safety rules.
- Safely operates all equipment and tools.
- Identifies and reports safety problems.
Meets all production and quality standards.
OTHER MARGINAL ACCOUNTABILITIES:
- May train less skilled operators as assigned.
- Performs other tasks as directed.
- May be required to work with hazardous waste.
ESSENTIAL EQUIPMENT, VEHICLES, MACHINERY AND/OR TOOLS USED:
- Pry bars, insert pullers, slide hammers
- Side cutters and/or knives
- Mallets
- Torches, hot pencils
- Air nozzles
- Air ratchet
- Wrenches; allen and crescent
- Mold Machines
- Power drill
- Flashlight, mirrors
- Hoist
- Dental picks
- Fork lift
TRAINING
Training is provided on the job.
PCC's Forklift Driving Safety Certification Training must be completed.
May be required to complete Hazardous Waste Management Training.
QUALIFICATIONS
- Skill in the wax molding operations, as demonstrated be six to twelve months of competent performance of Molder OR any equivalent combination of training and work experience.
- Ability to read, interpret and follow specifications on Technique Cards, load cards and other types of special instructions.
- Ability to perform basic mathematical calculations (addition, subtraction, multiplication and division).
- Ability to work alone with limited supervision.
- Written language skills required.
- Physical ability to perform the essential job functions.
In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings. Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov
/*generated inline style */
Primary Duties & Responsibilities
PRINCIPAL ACCOUNTABILITIES:
1. Tooling Preparation
Objective: to accurately prepare tooling dies for operation.
Essential Job Functions:
A. Assembles disassembles, prepares and positions tooling dies for operation; changes die inserts as required.
B. Adds chills and solubles per tech cards.
C. Removes and/or cleans tooling after operation.
2. Mold Machine Operation
Objective: To operate moderately complex molding machines accurately and efficiently using technique cards and established setup procedures. To maintain dimensional integrity of product.
Essential Job Functions:
A. Sets up, monitors, and controls mold machine functions.
B. Keeps dies clean during molding operations.
C. Removes wax parts from die, inspects for defects, and trims.
D. Cleans wax parts as required.
3. Completes logs and records; documents any modifications to process.
4. Meets all production and quality standards.
5. Safety
Objective: to take responsibility for and demonstrate safe work practices.
Essential Job Functions:
A. Adheres to plant and department safety rules.
B. Safely operates all equipment and tools.
C. Identifies and reports safety problems.
OTHER (MARGINAL) ACCOUNTABILITIES:
6. May train less skilled operators as assigned.
7. Performs other tasks as directed.
8. May be required to work with hazardous waste.
ESSENTIAL EQUIPMENT, MACHINERY AND/OR TOOLS USED:
1. Pry bars
2. Side cutters and/or knives
3. Mallets
4. Torches and air nozzles
5. Air ratchet
6. Wrenches; allen and crescent
7. Power drill
8. Flashlight
9. Hoist
10. Dental picks
11. Mold Machines
/*generated inline style */
Experience & Education
TRAINING:
1. Training is provided on the job.
2. May be required to complete Hazardous Waste Management Training.
/*generated inline style */
Required Skills
QUALIFICATIONS:
1. Skill in wax molding operations, as demonstrated by three to six months of competent performance in any wax molding utility, leach tank or core/gate cleaner positions is preferred
OR
any equivalent combination of training and work experience.
2. Ability to read, interpret and follow specifications on Technique Cards, Process Control Procedures and other special instructions.
3. Ability to perform basic mathematical calculations. (addition, subtraction, multiplication and division)
4. Ability to work alone with limited supervision.
5. Written language skills required.
6. Physical ability to perform the essential job functions.
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
Created: 2024-05-04
Reference: 2vZ8S9H0EGjC
Country: United States
State: Oregon
City: Milwaukie
Similar jobs:
-
Career Opportunities: ICW CNC Operator I (47389)
TouchPoint in Medford, Oregon -
Crane Operator - 3088
Barnhart Crane & Rigging in Portland, Oregon -
HOURLY: Machine Operator (Days)
Reynolds Consumer Products in Albany, Oregon💸 $14.20 per hour -
13R Field Artillery Firefinder Radar Operator
Army National Guard in Forest Grove, Oregon -
CHIEF POWER PLANT OPERATOR
U.S. Army Corps of Engineers in The Dalles, Oregon -
Production Operator I
Compunnel in Wilsonville, Oregon -
Heat Treat Operator (Albany, OR)
Consolidated Precision Products in Albany, Oregon -
Secured Space Operator
Security Industry Specialists in Boardman, Oregon💸 $27.50 per hour -
Forklift Operator
Costco in PORTLAND, Oregon -
CNC Machine Operator
Volt in Maywood Park, Oregon💸 $23 - $25 per hour -
Machine Operator-1 GateSync
Loram in Hermiston, Oregon -
Heat Treat Operator LPCS 57
Precision Castparts Corp. in 1 Portland, Oregon -
Production Operator I
Compunnel in Wilsonville, Oregon -
Production Operator - Portland (23)
Saint Gobain in PORTLAND, Oregon💸 $23.70 per hour -
Marine Equipment Repairer/Operator (Dual Rate) (Direct Hire Authority)
U.S. Army Corps of Engineers in Portland, Oregon -
Production Operator I
Compunnel in Wilsonville, Oregon -
Data Imaging Operator - Day Shift - ODHS
Relay Resources in Portland, Oregon -
Forklift Operator
Sierra Pacific Industries in Eugene, Oregon💸 $24.21 per hour -
HOURLY: Machine Operator (Third Shift)
Reynolds Consumer Products in Albany, Oregon💸 $14.20 per hour -
CDL A Contractor - Owner Operator
Haul in Eugene, Oregon