Molder--2nd Shift
Marion, New York
Employer: PARKER HANNIFIN CORP
Industry: Manufacturing
Salary: Competitive
Job type: Full-Time
Position Summary
Operate presses, ovens to manufacture PTFE billets that will be machined into seals.
Responsibilities
Reasonable Accommodations Statement
To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.
Essential Functions Statement(s)
• Daily attendance is a requirement of the job, as is arriving on time. Overtime is expected when customer demand dictates the need.
• Associate Operator C: Trainee as defined as under instruction until evaluation by a supervisor for proficiency.
• Load, operate and unload molding presses to create billets for the CNCs to machine into seals.
• Set up molding presses following Standard Work Instructions.
• Load oven racks and take billets to ovens for centering.
• Associate Operator B: Proficient in manual hydraulic press operation (molder), heat sizing or inspection process. All functions of an AO C plus the following:
• Prep work for machining including cutting stock, turning billets to fit work holding fixtures and sizing/rounding sleeves to work order specifications.
• Assembly Cell operations: Part cutting, knotching, and threading.
• Hand make secondary components and insert them into the seals.
• 75% Qualified in at least one job function, at least 50% Qualified in one other.
• Associate Operator A: Proficient in 3 of the following 4 processes: manual hydraulic press operation (molder), auto presses, heat sizing/coining process, or inspection. Qualified as AO B plus 1 of 3 options:
• Option 1. Knowledge of complex processing procedures
• Option 2. Applies formal Lean / Problem Solving techniques
• Option 3. 100% Qualified in one job function, at least 75% Qualified in 2 others
• Set up and operate manual equipment with little or no assistance.
• All Associate Operators are expected to perform the following:
• Perform preventive and basic maintenance on required equipment.
• Actively participate and support the plant's safety program. Report any injury or near hit immediately to your Team Lead, Supervisor, or EHS Manager. Report all unsafe conditions immediately to a Team Lead, Supervisor, Value Stream Manager, or EHS Manager.
• Actively participate in assigned High-Performance Team. The HPTs are meant to improve the work experience by allowing the employees an opportunity to lead and participate in continuous improvement projects.
• Record accurate and timely data, including order completions and quantity on daily labor reports, reclaim tickets for reject parts, and daily hours worked.
• Maintain a safe, clean, and orderly work area. Keep all walkways and aisle free of any debris or clutter. Maintain 5S standards by returning tools to shadow boards. Sweep floor and finishing area as needed.
• Other duties as assigned.
Qualifications
Competency Statement(s)
• Accuracy - Ability to perform work accurately and thoroughly.
• Detail Oriented - Ability to pay attention to the minute details of a project or task.
• Safety Awareness - Ability to identify and correct conditions that affect employee safety.
SKILLS & ABILITIES
Education:High School Graduate or General Education Degree (GED): Preferred
Experience:No prior experience necessary
ComputerSkills:
Certifications& Licenses:
Other Requirements:
PHYSICAL DEMANDS
N(NotApplicable)Activity is not applicable to this position.
O(Occasionally)Position requires this activity up to 33% of the time (0-2.5+ hrs/day)
F(Frequently)Position requires this activity from 33%-66% of the time (2.5-5.5+ hrs/day)
C(Constantly)Position requires this activity more than 66% of the time (5.5+ hrs/day)
PhysicalDemands
Lift/Carry
Stand
C
10 lbs or less
F
Walk
F
11-20 lbs
F
Sit
O
21-50 lbs
O
Manually Manipulate
F
51-100 lbs
N
Reach Outward
F
Over 100 lbs
N
Reach Above Shoulder
O
Climb
N
Push/Pull
Crawl
N
12 lbs or less
F
Squat or Kneel
O
13-25 lbs
F
Bend
N
26-40 lbs
O
Grasp
F
41-100 lbs
N
Speak
O
Other Physical Requirements
• Vision (Near, Color, Depth)
• Ability to wear Personal Protective Equipment (PPE) - Safety Glasses and Safety Shoes
WORK ENVIRONMENT
Work in a climate-controlled manufacturing environment with occasional exposure to noise and dust.
Conditions of Employment
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident ["green card" holders], or have refugee or asylee status).
Parker Hannifin
Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For more than a century the company has been enabling engineering breakthroughs that lead to a better tomorrow. Learn more at www.parker.com or @parkerhannifin.
Equal Employment Opportunity
Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. This position is subject to meeting export compliance eligibility requirements.
("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor")
If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) and Genetic Information Discrimination
Drug Tests
Drug-Free Workplace
In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment. Due to contracts with the US Government, drug testing will include marijuana testing, regardless of state law.
Operate presses, ovens to manufacture PTFE billets that will be machined into seals.
Responsibilities
Reasonable Accommodations Statement
To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.
Essential Functions Statement(s)
• Daily attendance is a requirement of the job, as is arriving on time. Overtime is expected when customer demand dictates the need.
• Associate Operator C: Trainee as defined as under instruction until evaluation by a supervisor for proficiency.
• Load, operate and unload molding presses to create billets for the CNCs to machine into seals.
• Set up molding presses following Standard Work Instructions.
• Load oven racks and take billets to ovens for centering.
• Associate Operator B: Proficient in manual hydraulic press operation (molder), heat sizing or inspection process. All functions of an AO C plus the following:
• Prep work for machining including cutting stock, turning billets to fit work holding fixtures and sizing/rounding sleeves to work order specifications.
• Assembly Cell operations: Part cutting, knotching, and threading.
• Hand make secondary components and insert them into the seals.
• 75% Qualified in at least one job function, at least 50% Qualified in one other.
• Associate Operator A: Proficient in 3 of the following 4 processes: manual hydraulic press operation (molder), auto presses, heat sizing/coining process, or inspection. Qualified as AO B plus 1 of 3 options:
• Option 1. Knowledge of complex processing procedures
• Option 2. Applies formal Lean / Problem Solving techniques
• Option 3. 100% Qualified in one job function, at least 75% Qualified in 2 others
• Set up and operate manual equipment with little or no assistance.
• All Associate Operators are expected to perform the following:
• Perform preventive and basic maintenance on required equipment.
• Actively participate and support the plant's safety program. Report any injury or near hit immediately to your Team Lead, Supervisor, or EHS Manager. Report all unsafe conditions immediately to a Team Lead, Supervisor, Value Stream Manager, or EHS Manager.
• Actively participate in assigned High-Performance Team. The HPTs are meant to improve the work experience by allowing the employees an opportunity to lead and participate in continuous improvement projects.
• Record accurate and timely data, including order completions and quantity on daily labor reports, reclaim tickets for reject parts, and daily hours worked.
• Maintain a safe, clean, and orderly work area. Keep all walkways and aisle free of any debris or clutter. Maintain 5S standards by returning tools to shadow boards. Sweep floor and finishing area as needed.
• Other duties as assigned.
Qualifications
Competency Statement(s)
• Accuracy - Ability to perform work accurately and thoroughly.
• Detail Oriented - Ability to pay attention to the minute details of a project or task.
• Safety Awareness - Ability to identify and correct conditions that affect employee safety.
SKILLS & ABILITIES
Education:High School Graduate or General Education Degree (GED): Preferred
Experience:No prior experience necessary
ComputerSkills:
Certifications& Licenses:
Other Requirements:
PHYSICAL DEMANDS
N(NotApplicable)Activity is not applicable to this position.
O(Occasionally)Position requires this activity up to 33% of the time (0-2.5+ hrs/day)
F(Frequently)Position requires this activity from 33%-66% of the time (2.5-5.5+ hrs/day)
C(Constantly)Position requires this activity more than 66% of the time (5.5+ hrs/day)
PhysicalDemands
Lift/Carry
Stand
C
10 lbs or less
F
Walk
F
11-20 lbs
F
Sit
O
21-50 lbs
O
Manually Manipulate
F
51-100 lbs
N
Reach Outward
F
Over 100 lbs
N
Reach Above Shoulder
O
Climb
N
Push/Pull
Crawl
N
12 lbs or less
F
Squat or Kneel
O
13-25 lbs
F
Bend
N
26-40 lbs
O
Grasp
F
41-100 lbs
N
Speak
O
Other Physical Requirements
• Vision (Near, Color, Depth)
• Ability to wear Personal Protective Equipment (PPE) - Safety Glasses and Safety Shoes
WORK ENVIRONMENT
Work in a climate-controlled manufacturing environment with occasional exposure to noise and dust.
Conditions of Employment
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident ["green card" holders], or have refugee or asylee status).
Parker Hannifin
Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For more than a century the company has been enabling engineering breakthroughs that lead to a better tomorrow. Learn more at www.parker.com or @parkerhannifin.
Equal Employment Opportunity
Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. This position is subject to meeting export compliance eligibility requirements.
("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor")
If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) and Genetic Information Discrimination
Drug Tests
Drug-Free Workplace
In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment. Due to contracts with the US Government, drug testing will include marijuana testing, regardless of state law.
Created: 2024-06-10
Reference: 49697
Country: United States
State: New York
City: Marion
Similar jobs:
-
Maintenance Repair Technician - 2nd Shift
ittxylem in Auburn, New York💸 $29.67 per hour -
Stockhandler- 2nd shift
News Corp. Class A in Depew, New York -
Service Foreman - 2nd Shift
Kenworth Northeast, Group Inc in Buffalo, New York💸 $25 - $35 per hour -
Fluorescent Penetrant Processor - 2nd Shift (Chittenango, NY)
Consolidated Precision Products in Chittenango, New York💸 $21.45 per hour -
Warehouse Associate (2nd Shift)
Cardinal Health Inc. in Montgomery, New York -
Production Supervisor - 2nd Shift (Mon. - Fri., 3:30 - Midnight)
Siemens Energy in Painted Post, New York -
Production Supervisor I 2nd shift
Henkel in Geneva, New York💸 $85000.00 per year -
Assembler - 2nd Shift
Atlas Copco in Voorheesville, New York💸 $22.50 - $45.00 per hour -
Nurse Practitioner/Physician Assistant 2nd Shift L&D Coverage
Upstate University Hospital in Syracuse, New York💸 $92000 - $147004 per year -
Metal Filter Specialist, CL2 - 2nd Shift
Danaher Corporation in Cortland, New York -
Material Handler - 2nd Shift
Medline Industries in Glens Falls, New York💸 $26520 - $42120 per year -
Registered Nurse, Triage - Telephonic, Remote - MI, NY, and CA - 2nd shift
landmark health in New York, New York💸 $28.03 - $54.95 per hour -
2nd Shift- Air Logistics Warehouse Specialist TP
Kuehne Nagel in Jamaica, Queens, New York, New York -
2nd Shift Fleet Fueling Operator
NOCO in Syracuse, New York -
Diesel Mechanic - 2nd shift
Kenworth Northeast, Group Inc in Syracuse, New York💸 $23 - $50 per hour -
2nd Shift Quality Laboratory Technician
Apex Systems in Batavia, New York💸 $23.30 per hour -
Document Services Lead Operator (2nd Shift)
Paul, Weiss, Rifkind, Wharton & Garrison LLP in New York, New York💸 $97000 - $106000 per year -
Machine Operator - 2nd Shift
Medline Industries in Glens Falls, New York💸 $28600 - $45760 per year -
Sheet Metal Fabricator- 2nd Shift
Ducommun in Coxsackie, New York💸 $17.00 - $20.90 per hour -
Warehouse Associate (2nd Shift)
Cardinal Health Inc. in Montgomery, New York