Gas System Specialist - Construction Inspector

READVERTISEMENT OF PREVIOUS POSTING

ENTRY SALARY: $65,189.58

OPEN UNTIL FILLED

Under general direction, the Gas System Specialist performs skilled and specialized work in maintenance, monitoring, and general operations of the Gas systems for the City of Clearwater. Inspects the natural gas systems, compressed natural gas operations, cathodic protection, identify and repair of gas leaks, addresses challenging maintenance problems and ensures gas systems work professionally and properly.

This recruitment is for the Gas Construction section in the Gas System Department.

Essential Functions: -- Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. Essential duties and responsibilities may include, but are not limited to, the following:

• Candidate will be knowledgeable of the Federal Pipeline and Hazardous Materials Safety Administration (PHMSA), Regional and State law requirements. Specifically, knowledgeable of the gas safety rules required by the Florida Public Service Commission (FPSC) for gas system inspections OR similar Gas Safety Rules from other U.S states. The candidate will contribute to the preparation and maintenance of all field records/data and tabulations required by regulatory agencies.
• Maintain working knowledge of regulatory requirements, suggest, and help implement methods to efficiently meet regulatory compliance.
• Assists the supervisor in the operations of one of the specialized areas within the gas department.
• Properly sizes gas lines, selects appropriate materials, uses best installation and construction practices, and ensures compliance with all ordinances.
• Diagnoses, operates, troubleshoots, and repairs a wide range of issues related to gas distribution systems. Including but not limited to, electrical systems (wiring problems, and/or component failures), metering equipment (i.e., diaphragm, turbine, rotary, orifice, etc.), regulator and valve issues (i.e., leaks, pressure irregularities, poor operation), flow computers, temperature sensors, etc.
• Responds to and engages with gas emergencies; provides first responder services in hazardous gas environments and during leak emergencies; locates and repairs leaks.
• Participates in periodic standby rotations for night, weekend, and emergency work.
• Provides training, guidance, and direction for other gas employees; ensures all staff understands the proper procedures for tool use, job specifications, code compliance, and safety; delegates and distributes work in the field and participates when needed.
• Drafts and prepares extensive paperwork and invoices; provides detailed invoices with parts, materials, and prices; documents and tracks all service orders and provides information on jobs completed.
• Establishing and maintaining good working relationships with colleagues and customers.
• Performs other duties as assigned.

Construction Specialist

• Knowledgeable in the operation, and basic trouble shooting of Supervisory Control and Data Acquisition (SCADA) systems.
• Uses knowledge of GIS maps and atlas mapping to run multiple construction projects simultaneously and provide the correct As-built data for GIS entry.
• Coordinates with contractors meter, service and main line installations, relocations, project management, and construction timelines.
• Well versed in the inspection, operation, and maintenance of odorant injection systems.
• Completes accurate testing and calibration adjustment for station and pipeline measuring equipment.
• Familiar in the maintenance and repairs of Compressed Natural Gas (CNG) stations, gate stations, and regulator stations to keep in compliance.

Distribution Maintenance Specialist

• Knowledgeable in the operation, and basic trouble shooting of Supervisory Control and Data Acquisition (SCADA) systems.
• Uses knowledge of GIS maps and atlas mapping to run multiple construction projects simultaneously and provide the correct As-built data for GIS entry.
• Skilled in rebuilding and testing all gas valves, meters, and regulators.
• Assists in the coordination of meter upgrades, valve maintenance, offsets, main line taps, project management, and distribution timelines.
• Ability to obtain and maintain API (American Petroleum Institute) 1104 welding endorsement (applies only to CGS welder).
• Well versed in the inspection, operation, and maintenance of odorant injection systems.
• Completes accurate testing and calibration adjustment for station and pipeline measuring equipment.
• Familiar in the maintenance and repairs of Compressed Natural Gas (CNG) stations, gate stations, and regulator stations to keep in compliance.
• Conducts cathodic protection inspections and coordinates required maintenance on steel distribution mains and service lines.

Service and Repair Specialist

• Knowledgeable with wiring schematics, appliance repair diagnostics, and converting appliances to natural gas to train and assist staff.
• Interacts with customers and public regarding repairs and code violations.
• Serves as a back up to scheduling the maintenance and repair of commercial and domestic appliances including cooking, heating, laundry, and other natural or propane gas devices.
• Serves as a back up to coordinate the initiation, termination, and transfer of meter accounts.

Installation Specialist

• Serves as a back up to facilitate inspections for various phases of projects.
• Has proficiency in residential and commercial gas piping utilizing CSST, galvanized and polyethylene pipes.
• Knowledgeable of wiring schematics, appliance repair diagnostics, and converting appliances to natural gas to train and assist staff.
• Knowledgeable of general construction practices, meter and regulator sizing, and jurisdictional permitting to train and assist staff.
• Interacts with customers and public regarding construction installation and damage complaints.
• Installs gas lines on the outlet side of the meter, to include the proper layout, design, and sizing of house piping systems for natural and propane gas.

Field Trainer Specialist

• Supports and provides training in the operation, and basic trouble shooting of Supervisory Control and Data Acquisition (SCADA) systems.
• Supports and provides training in the inspection, operation, and maintenance of gate station, regulator stations and odorant injection systems.
• Supports and provides training for wiring schematics, appliance repair diagnostics, and converting appliances to natural gas.
• Reports to and supports the Safety and Training Manager.
• Leverages Training and Education across the organization to improve operating standards.
• Attends Safety & Training meetings.
• Organizes mock drills to ensure all employees are prepared in the event of an emergency.
• Facilitates training of employees for the proper installation of gas mains and service lines per federal and state regulations.
• Knowledgeable in reading and interpreting GIS maps and atlas.
• Knowledgeable in Methods and Techniques used in Safety Training industry.
• Knowledgeable of Services and Operations of the Clearwater Gas System
• Motivates, and trains field technicians.
• Conducts compressive Safety and Training of all employees.

Licenses, Certifications, and Equipment:

A valid State driver's license is required.

Federal, State and Local Gas Certifications based upon area of assignment.

Does this position require a Commercial Driver's License? Yes

Type: Possession and maintenance of Class A or B CDL with necessary endorsements based on area of assignment.

This position is required to operate the below equipment, machines, tools, and other work aides:

Fax, copier, phone, radio, computer, vehicles, and other equipment as assigned.

Education and Experience:

High School Diploma, High School Equivalency Diploma or G.E.D. Certificate AND three (3) years of experience in gas distribution, maintenance, service, cathodic protection, installation, one (1) of which must be in specialized area of assignment; OR an equivalent combination of education, training, and experience may be considered. Must be able to pass random drug testing. Previous Construction Inspection knowledge and Construction Project management preferred.

Knowledge of -

• Municipal, state, and national gas codes, and gas distribution systems
• Common hand and power tools
• Tools, materials, and methods of pipe fitting used in the installation of gas mains, service lines
• Testing procedures and ability to install equipment and apply methods used to maintain the cathodic protection system lines
• Industry Standards/Best Practices for Hazards and Safety precautions
• Best Practices, tools, and equipment used in gas installations, service, and repair
• Department policies and protocols

Skill in -

• Understanding and completing oral and written instructions
• Working outdoors in adverse weather
• Performing physically challenging work
• Inspecting, supervising, and overseeing work of less skilled employees and providing training
• Learning gas system work procedures, practices, policies and safety precautions
• Establishing and maintaining good professional relationships with colleagues
• Dealing tactfully with the public
• Operating a computer with general p