NDT Penetrant Technician Level II 2nd Shift
Franklin, New Hampshire
Employer: Precision Castparts Corp.
Industry: Operations
Salary: Competitive
Job type: Full-Time
HOURLY PAY RATE: $ 25.00 - $33.00
* Depending upon experience *
SUMMARY:
ESSENTIAL DUTIES AND RESPONSIBLITIES:
Set up and standardize equipment, process parts, interpret and evaluate indications for acceptance or rejection, and document results.
Must comply with all applicable safety requirements, policies and procedures, while maintaining a clean, safe, and orderly work environment.
High school diploma or GED preferred but not required.
2nd SHIFT POSITION
** Limited relocation potential if required **
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */
Relocation
Relocation is authorized for this position.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
* Depending upon experience *
SUMMARY:
ESSENTIAL DUTIES AND RESPONSIBLITIES:
Set up and standardize equipment, process parts, interpret and evaluate indications for acceptance or rejection, and document results.
- Be thoroughly familiar with the scope and limitations of the PT method.
- Be capable of providing the necessary guidance and or supervision to trainees and Level 1 personnel.
- Be capable of reading and applying controls as required by customer specifications, codes, standards, and engineering drawings that control the PT method.
- Be capable of developing work instructions from general procedures for approval by the Responsible Level III.
- Have a basic knowledge and understanding of the investment casting process as well as the TIG welding process.
- Must be confident and capable to perform PT inspections on the most complex castings.
- Demonstrate the ability to utilize all special inspection equipment including UV borescopes with a high degree of accuracy.
- Must have the proven ability to consistently and adequately detect, evaluate, and identify the type or nature of surface indications to determine part conformance to the established acceptance criteria and with a degree of inspection accuracy that ensures defect escapes are a rare event.
- Must be capable of determining the most economical action needed to repair defective conditions by welding, blending, or other repair operations when allowed.
- Complete all required inspection records, certifications, and originate rework operations to repair castings using a variety of internal forms.
- Must have the Ability to direct, perform, and document all process control checks as required. (duplicated remove)
- Must be able to communicate effectively with Engineering or Supervision on technical matters or test results.
- Detect faulty operations, defective material or equipment, and report these and any unusual conditions to proper supervision.
Must comply with all applicable safety requirements, policies and procedures, while maintaining a clean, safe, and orderly work environment.
- Must participate in required training, medical monitoring, safety, and health evaluations and programs.
- Must wear required Personal Protective Equipment (PPE) in all designated areas of facility.
- *Perform all physical functions of position; standing, stooping, bending, sitting, walking, twisting, kneeling, turning and lifting of materials up to 50 lbs.
- Meet established attendance standards.
- Work overtime as needed.
- Must report any work-related injury or illness immediately to your direct supervisor.
- Perform other duties as assigned.
High school diploma or GED preferred but not required.
- Must meet the minimum experience and classroom training elements as required by NAS 410 and PCC Procedure RI 4.1 for certification to Level II.
- Must successfully pass all qualification and requalification exams without restrictions and maintain certification as a PT Level II inspector.
- Use simple shop mathematics.
- Work from engineering drawings, specifications, charts and tables.
- Use various types of precision measuring instruments.
- Apply specialized technical or trades knowledge equivalent to 5 years of trade training.
- More than 5 years casting experience performing inspections as a certified PT Level 1 Inspector Technician A and with the demonstrated ability to perform reliable and accurate inspections on the most complex castings using all specialized inspection equipment including UV borescope.
2nd SHIFT POSITION
** Limited relocation potential if required **
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */
Relocation
Relocation is authorized for this position.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
Created: 2024-08-22
Reference: OGZdujMVMOhQ
Country: United States
State: New Hampshire
City: Franklin
Similar jobs:
-
NDT X-Ray Technician TR OR Level I 2nd SHIFT
Precision Castparts Corp. in Franklin, New Hampshire -
Environmental Services Technician (per-diem) - 2nd shift
D-H Lebanon-MHMH in Lebanon, New Hampshire💸 $17 per hour -
1st & 2nd Shift, CNC Operator
The Heico Companies, LLC. in Nashua, New Hampshire -
NDT TRAINEE 2nd Shift
Precision Castparts Corp. in Franklin, New Hampshire💸 $22.00 - $25.00 per hour -
Foundry - Melt Caster 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $25.20 per hour -
Finisher (Hand File & Sand Grind) 2nd Shift
Precision Castparts Corp. in Franklin, New Hampshire💸 $18.50 - $23.00 per hour -
Warehouse Associate 2nd Shift
Marcone in Derry, New Hampshire -
Assembler - Londonderry, NH - 1st & 2nd Shifts
Day & Zimmermann Group in Londonderry, New Hampshire💸 $21 - $26 per hour -
Assembly B - 2nd Shift
L-3 Technologies in Londonderry, New Hampshire -
Maintenance Technician I or II - 1st or 2nd Shift
Experis in Portsmouth, New Hampshire -
Wax Assembly 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $21.75 per hour -
Environmental Services Technician (Full-Time, 2nd shift)
D-H Lebanon-MHMH in Lebanon, New Hampshire💸 $17 per hour -
Machine Operator- 2nd & 3rd Shift Job Details | Timken
Timken in Keene, New Hampshire -
Custodial Squad Leader - 2nd shift
Dartmouth College in Hanover, New Hampshire💸 $22.12 per hour -
Waste Management Technician (Full-Time, 2nd shift)
D-H Lebanon-MHMH in Lebanon, New Hampshire -
Inspector- 2nd Shift Job Details | Timken
Timken in Keene, New Hampshire -
Wax Injector 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $25.00 per hour -
Custodian - 2nd shift
Dartmouth College in Hanover, New Hampshire💸 $22.12 per hour -
Wax Repair 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $23.00 per hour -
Knockout Waterblast 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $24.00 per hour