NDT TRAINEE 2nd Shift
Franklin, New Hampshire
Employer: Precision Castparts Corp.
Industry: Operations
Salary: $22.00 - $25.00 per hour
Job type: Full-Time
HOURLY PAY RATE: $22.00 - $25.00
* Depending upon experience *
SUMMARY:
NDT Technician Trainees are required to be active participants in the training program for the Non-Destructive Testing (NDT) as controlled by NAS 410 and PCC Procedure RI 4.1.
Trainees gain work experience under the direct observation of a certified Level 2 or Level 3 or, a certified Level 1 or NDT instructor only when approved by the Responsible Level 3.
ESSENTIAL DUTIES AND RESPONSIBLITIES:
TRAINEE :
An individual who is documented as participating in a training program for an NDT method and is in the process of
becoming qualified for certification to Level 1-Limited, Level 1 or directly to Level 2 shall be considered a trainee. In
the technique/method in which they are preparing for certification, trainees shall:
LEVEL 1 :
In the method in which certified, Level 1 individuals shall:
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */
Relocation
Relocation is authorized for this position.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
* Depending upon experience *
SUMMARY:
NDT Technician Trainees are required to be active participants in the training program for the Non-Destructive Testing (NDT) as controlled by NAS 410 and PCC Procedure RI 4.1.
Trainees gain work experience under the direct observation of a certified Level 2 or Level 3 or, a certified Level 1 or NDT instructor only when approved by the Responsible Level 3.
ESSENTIAL DUTIES AND RESPONSIBLITIES:
TRAINEE :
An individual who is documented as participating in a training program for an NDT method and is in the process of
becoming qualified for certification to Level 1-Limited, Level 1 or directly to Level 2 shall be considered a trainee. In
the technique/method in which they are preparing for certification, trainees shall:
- Be documented as a trainee and be actively participating in a training program for a stated NDT method for a limited and specified period of time.
- Obtain experience under the direct observation of a Level 2 or Level 3 in the same method.
- Obtain experience under the direct observation of a Level 1 or instructor only when approved by the responsible Level 3.
- The trainee follows established procedures and part specific technique cards.
- Report faulty operations, defective material or solutions, and report these and any unusual conditions to proper supervision.
LEVEL 1 :
In the method in which certified, Level 1 individuals shall:
- Be able to follow work instructions.
- Have the skills and knowledge to process parts, document results and perform equipment standardization in accordance with approved work instructions.
- Have the skills and knowledge to carry out any necessary preparation of parts before or after testing in accordance with approved work instructions.
- Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard.
- Receive guidance or supervision from a certified Level 2 or Level 3 in that method when necessary.
- When specified in the written practice and approved by the Responsible Level 3, may perform interpretations and evaluations of specific product(s) or product form(s) for acceptance or rejection in accordance with approved work instructions.
- Make accept or reject decisions.
- Independently conduct tests within the method.
- Independently perform any other NDT function.
- Must comply with all applicable safety requirements, policies, and procedures, while maintaining a clean, safe, and orderly work environment.
- Must participate in required training, medical monitoring, safety, and health evaluations and programs.
- Must wear required Personal Protective Equipment (PPE) in all designated areas of facility.
- Perform all physical functions of position, standing, stooping, bending, sitting, walking, twisting, kneeling, turning, and lifting of materials up to 50 lbs.
- Meet established attendance standards.
- Work overtime as needed.
- Must report any work-related injury or illness immediately to your direct supervisor.
- Perform other duties as assigned.
- High school diploma or GED preferred but not required.
- Must qualify to PCC Structurals Quality Control Procedure RI 4.1
- The position requires a minimum of a high school diploma with the ability to read and follow established procedures and instructions.
- The individual will be required to enter a formal training program to obtain a certification as a Level 1 technician.
- Use simple arithmetic including decimals and fractions as needed.
- Must have the ability to read and work from established procedures, specifications, formulas, charts, tables, drawings, similar information.
- Entry level position with no previous experience in the method.
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */
Relocation
Relocation is authorized for this position.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
Created: 2024-09-01
Reference: RPIW1MinuH8Q
Country: United States
State: New Hampshire
City: Franklin
Similar jobs:
-
NDT X-Ray Technician TR OR Level I 2nd SHIFT
Precision Castparts Corp. in Franklin, New Hampshire -
Environmental Services Technician (per-diem) - 2nd shift
D-H Lebanon-MHMH in Lebanon, New Hampshire💸 $17 per hour -
NDT Penetrant Technician Level II 2nd Shift
Precision Castparts Corp. in Franklin, New Hampshire -
1st & 2nd Shift, CNC Operator
The Heico Companies, LLC. in Nashua, New Hampshire -
Foundry - Melt Caster 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $25.20 per hour -
Finisher (Hand File & Sand Grind) 2nd Shift
Precision Castparts Corp. in Franklin, New Hampshire💸 $18.50 - $23.00 per hour -
Warehouse Associate 2nd Shift
Marcone in Derry, New Hampshire -
Assembler - Londonderry, NH - 1st & 2nd Shifts
Day & Zimmermann Group in Londonderry, New Hampshire💸 $21 - $26 per hour -
Assembly B - 2nd Shift
L-3 Technologies in Londonderry, New Hampshire -
Maintenance Technician I or II - 1st or 2nd Shift
Experis in Portsmouth, New Hampshire -
Wax Assembly 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $21.75 per hour -
Environmental Services Technician (Full-Time, 2nd shift)
D-H Lebanon-MHMH in Lebanon, New Hampshire💸 $17 per hour -
Machine Operator- 2nd & 3rd Shift Job Details | Timken
Timken in Keene, New Hampshire -
Custodial Squad Leader - 2nd shift
Dartmouth College in Hanover, New Hampshire💸 $22.12 per hour -
Waste Management Technician (Full-Time, 2nd shift)
D-H Lebanon-MHMH in Lebanon, New Hampshire -
Inspector- 2nd Shift Job Details | Timken
Timken in Keene, New Hampshire -
Wax Injector 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $25.00 per hour -
Custodian - 2nd shift
Dartmouth College in Hanover, New Hampshire💸 $22.12 per hour -
Wax Repair 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $23.00 per hour -
Knockout Waterblast 2nd Shift
Precision Castparts Corp. in Northfield, New Hampshire💸 $18.50 - $24.00 per hour